On Sat, 26 Mar 2005 12:16:14 +1100, Ross <[EMAIL PROTECTED]> wrote:
> I've got no problems changing channels now on my 150 with 0.3.2o. The
> only thing I noticed is that it's still reporting as version 0.3.2n.
>
I see this as well...
>
> On Fri, 25 Mar 2005 14:57:10 -0600, Chris Kennedy <[EMAIL
On Thu, 24 Mar 2005 18:56:03 -0600, Chris Kennedy <[EMAIL PROTECTED]> wrote:
> It may be the firmware version, also is preemtible set in the
> kernel, may be another problem, the firmware version is very
> likely a suspect here.
>
Thanks for all your help guys... I just tried correct firmware.
S
> Note that the FM tuner is on the same i2c bus as the first TV tuner, while the
> second tuner is all alone on its i2c bus, so thus my theory that forcing
> radio configuration on both tuners is what's tanking the second one for some
> folks (but not sure why its fine for others...). Worth a shot,
On Thu, 24 Mar 2005 13:35:31 -0600, Chris Kennedy <[EMAIL PROTECTED]> wrote:
> Make sure you shut the system completely off for about 30 seconds, then
> restarted. Also try cat /dev/video0 > /dev/video16 and see how that
> works for you too. This sounds like something that happens if the
> card w
In addition- when I go to using the pvr-350, 0.3.2l gives me the
worst playback I've seen with pvr-350 tv-out, whether live tv or
watching previously recorded. stuttering mostly... this version
definitely isn't working for my system.
Mike
--
I get the following at bottom of dmesg when I try to watch
> > live tv within mythtv using the "working tuner" of the pvr-500:
> > cx25840: Decoder set size 720x480 (from 720x487) -> scale 0x65529, filter 0
> > ivtv: IRQ: IVTV_IRQ_DEC_DMA_ERR intr 1
> > ivtv: IRQ: IVTV_IRQ_DEC_DMA_ERR intr 2
> >
> --- John Freeman <[EMAIL PROTECTED]> wrote:
> > Looks like your not loading the correct tuner.ko and tveeprom.ko...
> >
> > > tveeprom: The eeprom says no radio is present, but the tuner type
> > > tveeprom: indicates otherwise. I will assume that radio is present.
> > > tveeprom: Hauppauge: mode
Hi-
I've got a pvr-350 and added pvr-500 to the system running Mythtv on
SuSE 9.2 on a Pundit-R. ivtv 0.3.2k.
The 350 works great, the 1st tuner of the PVR-500mce works great. The
2nd tuner gives me nothing-usually 9 times out of 10 I get a file
size of 0 when I #/dev/video2 > /tmp/test_captur
On Wed, 16 Mar 2005 00:16:53 -0500, Tyler Trafford <[EMAIL PROTECTED]> wrote:
> Since you have both a 350 and a 500, you'll need to stop the saa7127
> driver from claiming all the devices.
>
> It looks like the 350 is the first device, so you would want to add
> this to your module configuration:
On Tue, 15 Mar 2005 17:22:14 -0800, Jarod Wilson <[EMAIL PROTECTED]> wrote:
>Please move your in-kernel tuner module out of the way, it looks like that's
>getting loaded instead of the ivtv-provided tuner module, and it doesn't have
>support for type 57 (support has to be in both your loaded tveep
Hi-
I think I'm getting close here. SuSE 9.2 in a pundit-r with pvr-350
which has worked fine and now I've added a new pvr-500. My
understanding was that tuner=57 was supported in 0.3.2i. From the
log, it appears that ivtv is telling the card to set to tuner 57, but
it's not getting a reply. I
Hi-
My current mythtv box is happily running SuSE 9.2 over the tv-out of a
pvr-350 on a pundit-r. I was using ivtv-0.2.0, installed by rpm from
http://folk.uio.no/oeysteio/Programvare/suse/9.2-ivtv/i586/.
We've decided that a couple more tuners wouldn't hurt and I picked up
a pvr-500mce. I've
Hi-
I'm having problems getting a proper frequency table for my Pundit-R,
PVR-350, MythTV system. Pardon the rambling e-mail, but as I'm not
sure what are relevant and what are irrelevant observations.
In chronological order:
December 04. PVR-350 in old epia box, under FC3, tuner works fine,
t
fb0
>
> With the appropriate device.
>
> John
>
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:ivtv-devel-
> > [EMAIL PROTECTED] On Behalf Of Michael Wester
> > Sent: 14 January 2005 20:34
> > To: ivtv-devel
> > Subject: [
Hi-
I'm trying to get X to work on PVR-350 TV-Out. X crashes upon start.
Relevantlnies of Xorg.O.log file at bottom of post. System is fresh
install of SuSE 9.2 on Pundit-R. I installed IVTV from rpms found at:
http://folk.uio.no/oeysteio/Programvare/suse/9.2-ivtv/ These RPM
installed 0.2.0-9
I've also included /var/log/messages at bottom of post as well.
Thanks for any help.
MRW
On Fri, 14 Jan 2005 10:04:01 -0800, Michael Wester <[EMAIL PROTECTED]> wrote:
> Hi-
>
> I'm trying to get X to work on PVR-350 TV-Out. X crashes upon start.
> Relevantlnies
16 matches
Mail list logo
