Hi guys,
This is buildbot speaking. I have finished a build of jallib-standard on jallib.
Buildslave for this Build: sebbot
Build Reason:
Build Source Stamp: HEAD
Blamelist: rob.jansen
Build succeeded!
Logs are attached.
sincerely,
-The Buildbot
--
You received this message because you are
Hi Rob,
Yes, the whole system operates at 3v3.
I tried to make it work on a manufactured prototype (it's a part of a
bigger project), on a development board, and even a breadboard, with no
success... I buyed and tried several modules (the same as yours) but no
way :-(
Le mar. 9 févr. 2021 à
Hi Gilles,
I can give it a try this weekend. I do not have a 18f45k22 but I may have a
18f25k22 (same family).
One more question. This device operates at 3.3 Volt and in your schematic
diagram you connect it to VCC and directly to the PIC but for that your PIC
needs to work at 3.3. Volt too.
Branch: refs/heads/master
Home: https://github.com/jallib/jallib
Commit: 9b7a0cff3206ab08dc85f890537a729dc61cff25
https://github.com/jallib/jallib/commit/9b7a0cff3206ab08dc85f890537a729dc61cff25
Author: Rob Jansen <12682653+robjanse...@users.noreply.github.com>
Date:
Branch: refs/heads/master
Home: https://github.com/jallib/jallib
Commit: c6488f05e025d00588989c5cdcbbb398fe6486d1
https://github.com/jallib/jallib/commit/c6488f05e025d00588989c5cdcbbb398fe6486d1
Author: Rob Jansen <12682653+robjanse...@users.noreply.github.com>
Date:
Branch: refs/heads/master
Home: https://github.com/jallib/jallib
Commit: c7d7a0e1457616c943209bbacfb61583565d33e9
https://github.com/jallib/jallib/commit/c7d7a0e1457616c943209bbacfb61583565d33e9
Author: Rob Jansen <12682653+robjanse...@users.noreply.github.com>
Date:
Hi guys,
This is buildbot speaking. I have finished a build of jallib-standard on jallib.
Buildslave for this Build: sebbot
Build Reason:
Build Source Stamp: HEAD
Blamelist: mattschinkel
Build succeeded!
Logs are attached.
sincerely,
-The Buildbot
--
You received this message because you
Hi Rob,
thank you for your quick answer
Yes you're right, I made a mistake while posting (I was a bit tired ;-) ,
the correct code I tested with is this one:
-- nRF905 pin definition.
alias nrf905_spi_sck is pin_B3
alias nrf905_spi_sck_direction is pin_B3_direction -- To SCK of nRF905
alias