anonymous wrote : Server remote has:
| Host file:
| 127.0.0.1 localhost
|
We are more interested in the host file of the client :)
What does the client host file have? It should have a mapping between the
hostname obelix and the z.z.z.z public IP.
View the original post :
Hi,
I need to replace the following call in legacy bytecode:
dataInputStream.read(buf, 0, len);
by
dataInputStream.readFully(buf, 0, len);
The original read() has the obvious flaw that it does not check for the return
value of dataInputStream.read, which leads to problems if the
manik, thanks very much. Inval-async mode worked now.
I think it is not possible to make only one server response read request,
right? if one server failed to response, the other server could response at
once. but at most case, both the server loader will response read request.
another
Please provide more details. Which exact version of JBoss AS? And your log
shows that its binding to 9100 which is not the default port that JBoss uses.
Did you or someone change some configuration file which sets it to 9100. And
how do you start the server? Do you pass the
You might create a dependancy between your Queue resource and an external MBean
Service which is in charge to verify if the remote server is running
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250796#4250796
Reply to the post :
Hi, I reported your message in NetBeans bug tracking system, so it can be
addressed for the next release:
http://www.netbeans.org/issues/show_bug.cgi?id=170739
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250797#4250797
Reply to the post :
It looks like something is wrong, i would use jboss 5.1 it comes shipped with
JBM.
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250800#4250800
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250800
It sounds like you are receiving the message but not acknowledging it, that
means it will still be in the database until you acknowledge.
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250801#4250801
Reply to the post :
As Peter mentioned, there have been deployment performance issues in AS-5.
However, if you are using JBoss AS 5.1.0.GA then there have been many
improvements. But the deployment timings don't yet match with the 4.x series of
the AS.
See this thread for details about EJB3 deployment
Hello klester,
I am newbie at jboss forums and am trying to use your guide to configure the
timeout in my Jboss server.
I've modified jboss-service.xml including the Mbeans UnifiedInvoker and
Connector; I've applied changes too in the standardjboss.xml adding the
invoker-proxy-binding and
And I found this: https://jira.jboss.org/jira/browse/JBPM-2028
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250808#4250808
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250808
Hello,
I'm strugling with the conversion from jbpm3 to jbpm4 in our application:
I'm trying to find a workaround for not being able to configure a custom
Variable Resolver (we need to make decisions based on data that is not stored
in taks variables but in our own datastore)
I was thinking
Exception in thread JbpmCommandExecutor java.lang.NoClassDefFoundError:
org/hibernate/Session
at
org.jbpm.persistence.db.DbPersistenceServiceFactory.openService(DbPersistenceServiceFactory.java:55)
at org.jbpm.svc.Services.getService(Services.java:136)
at
jBPM4 does not have bpel, nor will it. The choice was made to go a different
direction for bpel: https://www.jboss.org/riftsaw
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250811#4250811
Reply to the post :
the on event= makes it directional in 4, the event type=... in 3
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250812#4250812
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250812
In jBPM 4, they are by default in the DB
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250814#4250814
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250814
___
jboss-user mailing
so?
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250815#4250815
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250815
___
jboss-user mailing list
jboss-user@lists.jboss.org
Sofie,
Read the userguide about decisions and use the 'handler' solution
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250816#4250816
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250816
The position of the PVM has not changed, it just does not have a separate
project anymore.
jBPM is the project. It contains several 'modules' jPDL and BPMN2 (under
development) are process 'languages' based on the PVM which is another one of
these 'modules'. The PVM can be used completely
steeqs4, if you could answer, I would be interested in what you did with
Glassfish/BPEL, since Glassfish is my target :
_ did you need additional components to Glassfish ? like OpenESB ?
_ does your solution have a persistence service ? (or something that remembers
when a process was stopped
My suggestion would be to at post a stacktrace and read
http://www.jboss.org/index.html?module=bbop=viewtopict=158610
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250820#4250820
Reply to the post :
steeven wrote :
| another question, how to make the server readonly? the server will accept
changes from client side. it is dangerous for my case.
|
Hmm. You could make the client not push writes to the server by using the
ignoreModifications attrib to the cacheLoader element.
You could
Hello,
Just fixed, I have to add the the invoker to start before the scanner starts
looking at /deploy.
But anyway I am unable to make the EJB Client gets a timeout.
I'll reply with more details later.
Regards
View the original post :
We don't want to create custom tasks, we want to extend the task object's data
model.
So it is not the execution we want to change, but the actual task persisted
data model.
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250829#4250829
Reply to the post :
The loop in ClientProducerImpl seems to be responsible:
while (!lastChunk)
| {
| byte[] bytesRead = new byte[minLargeMessageSize];
| int numberOfBytesRead;
|
| try
| {
|numberOfBytesRead =
Then next time please mention you did all this and this the additional
information you provided now.
The handler will work, otherwise I would not have pointed to you, but you have
to be creative you can pass arguments to the handler. So make a generic
handler and pass it the expressions
Uhhhmmm... if you want to extend the datamodel you have to have a corresponding
class. In jBPM4 that is the TaskActivity class, so by extending that and
changing the corresponding config files you achieve what you want I think, so
rams.rapo is right
View the original post :
I'm bumping this as I would be very interested in the response from JBoss
themselves. The original questions raised by Ben are highly relevant to the
last two JBoss based projects I've worked on, and I'm now hitting it on a 3rd.
Would it be possible for JBoss to give a statement on what is the
please take a look at the bridge example that comes with JBM download.
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250825#4250825
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250825
djcye,
It is very hard for us to understand everything if we just see snippets/partial
stacktraces etc... please make a unittest as described in
http://www.jboss.org/index.html?module=bbop=viewtopict=158610 so we can have
a better look and mayve try ourselves.
View the original post :
Of course I have done this extensively before posting to this mailing list.
But this solution isn't working for me because i don't know the names of the
transitions in the handler class. We are trying to build a generic system (we
create processdefinitions on the fly) and cannot create specific
Hi,
I am using jboss portal 2.7.2 bundled version on linux platform jdk 1.6
whenever i try accessing
http://localhost:8080/portal-wsrp/MarkupService?wsdl
I geta a xml error
XML Parsing Error: no element found
Location: http://localhost:8080/portal-wsrp/MarkupService?wsdl
Line Number 1, Column 1:
Thanks alessio, setting StubExt.PROPERTY_AUTH_TYPE works fine.
I have also a problem with SoapUI Digest which always give me an Invalid User.
for exemple : using kermit/thefrog, the generated request for SoapUI is :
| soapenv:Envelope xmlns:hel=http://org.qualipso.factory.ws/helloworld;
Hi All,
I have one ParentServer, which will generate all the messages [queue/topic] and
atleast 20-50 other servers, on which we want to recieve the same message that
was sent to the ParentServer by a client program. All these servers are running
JBoss AS 5.1.x and JBM 2, BETA 4.
Since I am
I have two domains ( abc.xyz.com lmn.pqr.com) mapped to my machine ip.
Now, I wish a user, simply by entering abc.xyz.com into her browser should be
able to access a war file xyz.war on my JBoss 5 server.
Similarly, an entry lmn.pqr.com in browser should lead her to pqr.war on the
same JBoss
Ronald,
Maybe I've missed something but if the event is propagated to the super-process
level then I need to write an actionhandler/eventlistener to direct it at the
node in question or is it visible to all nodes in the process?
Another question - can events be filtered by source node?
View
Hi,
problem is the same:
javax.naming.CommunicationException [Root exception is
java.rmi.UnknownHostException: Unknown host: obelix; nested exception is:
java.net.UnknownHostException: obelix]
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:724)
at
Using JBOSS 5 and Richfaces.
I have an EAR file containing
lib.jar
ui.war
lib.war contains an EJB Service
| @Stateless
| public class ServiceImpl implements Service {
| ...
| }
|
ui.war contains a JSF backing bean Backing
| public class Backing{
|
| @EJB
|
@npirard: questions about other bpel engines are probably better asked in the
respective forums/mailinglist
@steeqs4: you have wrong info.
- jBPM4 can run on jboss 4.2.x, it is just not tested by the team, probably
needs some tweeking here and there
- jBPM4 at the moment just uses the graphical
you just need an eventhandler ON the node
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250873#4250873
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250873
___
jboss-user
I'm having difficult with an application deployed in a JBoss 5.0.1 cluster
using JBoss messaging. After a period of time, we run out of heap and
everything falls over. Using Eclipse Memory Analyzer, I've tracked the leak
down to a surfeit of JBossObjectMessage objects, which appear to still be
thx!
an additional noob question: the userguide explains that changes to variables
have to be saved to the DB explicity.
in which cases i have to do this ?
(1) when i modify variables in an java node - inside the process ?
(2) when i modify variables in an eventlistener/handler - inside the
Hi,
JBoss processes the HandlerTypes in the following order for JAXWS:
POST
ENDPOINT
PRE
Since the POST handler needs to parse some information from the soap message to
identify the ENDPOINT handler chain to call, you should do your decrypting at
the level of the POST handler.
To do this, you
Hi,
activate logging of the security layer, this will probably provide you with
more details (e.g. failures in the login module).
Take a look at http://www.jboss.org/community/wiki/SecurityFAQ , question 4.
Best regards
Wolfgang
View the original post :
Ignore my post above, I figured out that this probably has nothing to do with
the JBOSS container. Some kind of issue in my Maven setup prevents the
Backed.java class to be compiled correctly...
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250886#4250886
kukeltje, thanks for your response it clarified a lot for me.
May be you could also comment on persistence a bit:
The Alpha version of PVM (http://jboss.org/jbossjbpm/pvm_downloads/) contained
some persistence facilities allowing to save process definitions into database
tables. In the JBPM
@kukeltje: Thanks, I didn't know about riftsaw and was just coming to that
realization wrt BPMN.
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250891#4250891
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250891
Configuration:
Jboss 4.2.3 GA
Jboss Messaging 1.4.2-SP1
ClusteredConnectionFactory is loadbalanced and failover enabled
Clustered and FailoverOnNodeLeave is set to true in PostOffice Service
Setup:
2 Nodes
1 Sender ( invoking calls to session bean, resulting in JMS events to
Can you post your receiving code here?
Thanks.
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250895#4250895
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250895
___
jboss-user
plz. find below my receiver code
| private void createJMSClient ()
| {
| final Properties props = new Properties();
| props.put(Context.INITIAL_CONTEXT_FACTORY,
org.jnp.interfaces.NamingContextFactory);
| props.put(Context.URL_PKG_PREFIXES,
I think you should use durable subscriber to make sure the message won't get
lost. Can you try?
Thanks
Howard
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250899#4250899
Reply to the post :
Durable subscription didn't suites our requirement as, durable subscription
supports only one active subscriber at a rime.
But, in our real scenario, we are targeting more than 1000 clients.
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250900#4250900
Reply
What is your windowSize?
I will make a few tests.
With LargeMessage, you should have a bunch of pending packets waiting to be
delivered on the NettyQueue, but you shouldn't have more than what's configured
on the windowSize. Otherwise you would get out of memory easily.
I would need to look
well in my evaluation criteria i pointed out, that fault handling (of business
and technical faults) is important for long runnig workflows.
but i am not sure to say yes, in jbpm you can just use a variable, put an err
message inside, take another transition and handle the failure - so failure
From my jbm-jms.xml
connection-factory name=SocketConnectionFactory
| connector-ref connector-name=netty/
| entries
| entry name=ConnectionFactory/
| entry name=XAConnectionFactory/
| /entries
| !-- 128K chunk size for large messages --
|
where in the userguide is that stated?
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250908#4250908
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250908
___
jboss-user mailing
A single producer? Or you're opening several Producers? How many threads doing
this.. just one?
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250909#4250909
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250909
Dino,
You are thinking in solutions. I'd first like to know what your 'problem' is.
If you want an object model of the processdefinition, you can read the xml file
from the repository and e.g. use jaxb to make one.
View the original post :
Yes a single producer on one thread from a junit test case.
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250912#4250912
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250912
___
Hi,
I've setup an MDB to listen to a remote queue using these instructions:
http://www.jboss.org/community/wiki/HowDoIConfigureAnEJB3MDBToTalkToARemoteQueue
This works great.
Next I try and inject an EJB into that MDB using the @EJB annotation. By the
way, I'm running JBOSS AS 5.1.0 GA on
Can you send me a sample test showing this happening?
clebert at redhat dot com
or clebert dot suconic at jboss dot com
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250915#4250915
Reply to the post :
Confused? The exceptionhandlers in jBPM 3 were *technical* exceptionhandlers,
not the ones like in e.g. bpel or compensations in bpmn. Business level 'error
handling' can still be done with e.g. transitions that go to certain nodes etc.
There just is no specific name or something for it.
a0001428 wrote : Hi,
|
| problem is the same:
|
| javax.naming.CommunicationException [Root exception is
java.rmi.UnknownHostException: Unknown host: obelix; nested exception is:
| java.net.UnknownHostException: obelix]
| at
jBPM doesn't have a mechanism for detecting changes automatically to variable
values. So if you get e.g. a serializable collection from the process variables
and add an element, then you need to set the changed variable value explicitely
for the changes to be saved to the DB.
Environment:
Windows 2003 Server standard
Jboss EAP 4.3
Jboss portal 2.6.8 GA
removed Hypersoninc DS file added oracle-ds.xml and portal-ds.xml both pointing
to Oracle 9i backend.
Checked the jbp_users table and it contains the admin and user users.
Jboss startsup and no errors on the portal
Created a feature request in jboss jira. Link:
https://jira.jboss.org/jira/browse/JBAS-7195
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250922#4250922
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250922
Yep, you got it wrong you have to SET it, not save it. pseudocode:
HashMap String, String var = service.getVariable(myVar);
var.put(additionalItem, valueOfItem);
Then the processvariable in the engine is not updated.
You have to do
service.setVariable(myVar, var)
and that is with all
kukeltje wrote :
| You are thinking in solutions. I'd first like to know what your 'problem'
is. If you want an object model of the processdefinition, you can read the xml
file from the repository and e.g. use jaxb to make one.
- We use a UI framework which can easily work with data
Hello,
I am new to WS-Security and i am very confused now:
I want to create a webservice where a lot of authorized clients (user+password
protected) can call special methods. The communication between the client
server must be encrypted and the server should authenticate to the client
thx for support, now i see =)
i realy would like to invite you to a beer ^^
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250929#4250929
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250929
Hello, everybody!
I've a minor JBoss configuration problem. Consider the following
netstat -lanp | grep tcp | grep LISTEN output:
| tcp0 0 127.0.0.1:3873 0.0.0.0:*
LISTEN 3055/java
| tcp0 0 0.0.0.0:53570 0.0.0.0:*
I have an MDB listening to a remote queue. Both my MDB and my queue are running
in JBOSS AS 5.1.0 servers. The queue is running on a Solaris 10 box and the MDB
is running on a OSX box (my laptop.)
I setup my MDB acording to these steps:
Beer? Definitely not tonight (even if you lived next door) since I still am not
fully recuperated from last night.
So can I take a rain check? (where do you live?)
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250935#4250935
Reply to the post :
a ui framework for? Designing processes? Then I think you are out of luck. It
would be very complex to make db tables like in 3. The current (4) situation is
much simpler for most cases (but yours).
Yet, I'd almost like to ask the same question again what is it that you
want to achieve?
I still get the same error even when the doubleslash is corrected:
2009-08-21 14:00:04,317 INFO
[org.jboss.varia.property.SystemPropertiesService] Loaded system properties
from: file:/C:/jboss-4.2.2.GA/server/default/conf/props/rdm.properties
rdm.properties
| # General properties
|
|
Where shoudl I upload dtd files for xml files that my web pplications serve? I
can add the url for the dtd in the prologue of the xml file so the dtd can be
used seamleassly
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250955#4250955
Reply to the post :
Hi gaohoward, Thanks for your reply. I followed the examples but there is no
sample with IBM MQ. I tried with the below conf without luck.
I get the java.lang.IllegalArgumentException: Connection factory must be
XAConnectionFactory with the following conf.
Please let me know how to make IVTCF
I found that user is saved in session, but not the roles. Therefore, I changed
the viewfile.jsp and pending_items.jsp so that roles are saved in the session.
I also changed the CMSPreviewServlet so that it retrieves the roles from the
session and put it in JCRCMS object. Now it is working fine.
I would suggest you remove the schema and create a brand new one. Then start
the jboss portal server. It will create a brand new user table.
Brian Ko
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250974#4250974
Reply to the post :
Have you tried with non CMS super user? It works fine with CMS super user. Also
it works with anonymous ot user permission. It does not work only with role
permission. I already found the solution and I will post it.
View the original post :
Sorry for the wrong posting.
View the original post :
http://www.jboss.org/index.html?module=bbop=viewtopicp=4250976#4250976
Reply to the post :
http://www.jboss.org/index.html?module=bbop=postingmode=replyp=4250976
___
jboss-user mailing list
I found that user is saved in session, but not the roles. Therefore, I changed
the viewfile.jsp and pending_items.jsp so that roles are saved in the session.
I also changed the CMSPreviewServlet so that it retrieves the roles from the
session and put it in JCRCMS object. Now it is working fine.
Hello there,
Am using JBoss 5.1.0GA and JDK 1.5.0_19 on OS X Leopard.
Created a working [SendMailServlet|http://tinyurl.com/SendMailServletCode].
Have now decided to refactor it into two separate classes (extract out JavaMail
code to a separate class and create a ServletController).
Am also
83 matches
Mail list logo
