Re: [j-nsp] Verizon Outage & Network Virginia

Jason J. W. Williams wrote: > Looks like there was a cut in the primary fiber line going through > Relay, MD on the 15th. And before they could get it fixed, on the 17th > the backup fiber path was cut accidentally by CTX. At least, that's > what it seems like piecing together a few different bits

Re: [j-nsp] Verizon Outage & Network Virginia

Looks like there was a cut in the primary fiber line going through Relay, MD on the 15th. And before they could get it fixed, on the 17th the backup fiber path was cut accidentally by CTX. At least, that's what it seems like piecing together a few different bits of info. -J On 3/19/07, [EMAIL PRO

Re: [j-nsp] Verizon Outage & Network Virginia

may be on their PIP ( cisco side ) network -Original Message- From: [EMAIL PROTECTED] To: juniper-nsp@puck.nether.net Sent: Mon, 19 Mar 2007 1:33 PM Subject: [j-nsp] Verizon Outage & Network Virginia Hey there, Was anyone affected by the multiple Verizon OC-12 failure that happene

[j-nsp] Verizon Outage & Network Virginia

Hey there, Was anyone affected by the multiple Verizon OC-12 failure that happened to Network Virginia? Curious what happened. -J ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] Indirect next Hop

A few have posted me indicating that the attached thread did not make it. Pasted inline here. Its not really that meaty, but hoping its useful. Regards [begin] Hey Richard, I can't comment on longer convergence times, but can perhaps clarify the 8.2 INH feature. JNI started using RE based

Re: [j-nsp] MAC address accounting on shared L2 IX - can it be done?

On Sun, Mar 18, 2007 at 12:43:51AM -, Phil Sykes wrote: > > > Ah, it *is* the documentation which is obtuse :-) Your > > message made me check a bit more, and I finally found the > > "show interfaces mac-database" command. > > > > Now if the "Configuring MAC Address Accounting" documentati

Re: [j-nsp] aggregate link problem between juniper T640 and cisco6509

Hi Andre, It would be no different than configuring trunk on ethernet interface ie ae0 vlan-tagging; unit x { vlan-id x; } unit y { vlan-id y; } Regards, Jeff > -Original Message- > From: [EMAIL PROTECTED] [mailto:juniper-nsp- > [EMAIL PROTECTED] On Behalf Of [EMAIL

[j-nsp] Copnfiguring routing instance over a specific lsp

Hi all, I have tried to route a routing instance over a specific lsp than others. Triying policy based routing failed.. Below I found a topic on forum belongs to the same issue, but it didn`t work. Is there anybody succeed on this issue, and can share solution with me.. Thanks in advance, Yil