waqas Mohammad wrote:
Hi,
I am facing problem with installation of Netscreen VPN client 10.7.7 on
windows Vista, dose it works on Vista or it is only design for XP?
10.8.3 build 6 works on Vista. Maybe you should upgrade.
___
juniper-nsp
Yes, no tp hardware in the chassis, this is why I'm using no-tunnel
-services cmd.
Is there any workaround? Or at least the documentation mentioning that VPLS
PE is not supported on certain FPCs...
Documented for instance at
Hi ALL,
please can someone help to understand rib-group.. i cN't find a clear
document explaining the concept.
i'll appreciat ure help.
merci/
salutation khalid
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
Does the graceful restart feature for LDP works in a single control card
scenario? (similar to Routing protocols?)
Regards,
Monika
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Great. Thanks. Munish.
I've never be able to observe this status vector in Wireshark and I captured
l2vpn BGP updates many times. Does Wireshark (Ethereal)
encoder support this status vector? Is there any extension or update that I
need to apply to the Wireshark to be able to see a complete
A-ha. Thanks.
I needed an additional router in my setup, so I was using this older M20.
Obviously this won't work. If I segment my M320 into two logical routers,
then one of those two logical routers on M320 would replace the M20 and I
should be able to proceed with this VPLS setup, correct?
On
It basically allows two routing tables to share information. In the case
of the global routing tables inet.(0-4) it allows you to share their
information with a vpn without wasting memory by actually copying the
routes into that vpn. For example if you want to give a customer internet
access
One thing to add, if you don't have the tunnel-pic, you need to
configure some sort of VE interface, in addition to use
no-tunnel-services statement.
-Simon
On Thu, Jul 31, 2008 at 9:00 AM, Marlon Duksa [EMAIL PROTECTED] wrote:
A-ha. Thanks.
I needed an additional router in my setup, so I was
Thanks. Can you provide little more info on this, or at least doc reference.
I've never heard of this.
Thanks,
Marlon
On Thu, Jul 31, 2008 at 2:56 PM, Simon Chen [EMAIL PROTECTED] wrote:
One thing to add, if you don't have the tunnel-pic, you need to
configure some sort of VE interface, in
Hi,
You should be able to see it in BGP Update Message, a sub-tlv under
MP_REACH_NLRI - NLRI. I don't think that it is decoded in Wireshark or
Ethreal. But you should be able to see at the Hex decimal values by
clicking above below the NLRI tlv, there must be some missing Hex
values which are
10 matches
Mail list logo