Is this the export version of JUNOS?
On Sat, Feb 28, 2009 at 1:52 AM, steve.2.p...@bt.com wrote:
Trying to configure Ipsec on M10i with PE-AS2 pic
Juniper documentation :
http://www.juniper.net/techpubs/software/junos/junos85/swconfig85-servic
On Sat, 28 Feb 2009, Mark Tinka wrote:
Remember, your Loopback address takes a netmask of /32. So
you can have as many address as you (plan to) have
routers... with the exception of x.x.x.0 and x.x.x.255, of
course.
What kind of exception is this? In CIDR world you can use any address you
On Saturday 28 February 2009 06:31:15 pm Cougar wrote:
What kind of exception is this? In CIDR world you can use
any address you like except first and last _LAN_
addresses when netmask is /30 or less. With /31 and /32
can use any address and so far I haven't seen any
problems using x.x.x.0
All major vendors support 0 and 255 as loopback in the last octet. o if
you are using J or C for instance, your safe. If you use an obscure
small vendor, the choice to use 0 and 255 can come back and bite you in
the ***.
Cheers
Patrik
Mark Tinka wrote:
On Saturday 28 February 2009 06:31:15 pm
Experts,
do you know if and how to extend the FPC range in order to avoid the following
nasty error?
The interface of course will not be physically present in olive, but this will
allow to validate the config anyway.
Also a solution could be to disable the FPC value check at all, if I only knew
://tinyurl.com/chwjms
Mark.
-- next part --
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 835 bytes
Desc: This is a digitally signed message part.
URL:
https://puck.nether.net/pipermail/juniper-nsp/attachments/20090228/18f5212a
6 matches
Mail list logo
