Hello,
While looking in the documentation of Juniper EX switches series, i see
GRE protocol is insupported.
During some surfing around, i've seen GRE support is in some roadmap for what
seems to be a long time.
Could we expect something about that shortly ?
Regards.
Curious... Are you sampling via Firewall filter, or is sampling
applied at the Interface?
On 9/3/09, Servet ser...@doruk.net.tr wrote:
Hi Guys
i have a problem with juniper netflow traffic values, i think there is no
problem about the config and flow-analyser. If i use a cisco device, the
Hello Guys,
I have this message on M320 router 1:
ho...@lism320r1-re0 show log messages.1.gz | match vrrp
Sep 2 16:05:42 LISM320R1-re0 /kernel: arp_update_iff_vrrp: IFF ae0
doesn't have a vrrp group configured
Sep 2 20:04:35 LISM320R1-re0 /kernel: arp_update_iff_vrrp: IFF ae0
doesn't have a
Hi There,
sampling {
input {
family inet {
rate 1;
run-length 1;
max-packets-per-second 65535;
}
This part has me worried. It says, Sample every packet, and the next
packet too. You might want to try this instead for sakes of clairity:
Hi Chris,
Stefan mean, that You did not apply some family inet filter (input and
output) on interfaces!
Check this examples for Juniper routers:
http://www.splintered.net/sw/flow-tools/docs/flow-tools-examples.html
---
Yev.
Stephen
Sampling applied at the interface ...
i dont use firewall filter.
- Original Message -
From: Stefan Fouant sfou...@gmail.com
To: Servet ser...@doruk.net.tr; juniper-nsp@puck.nether.net
Sent: Thursday, September 03, 2009 3:18 PM
Subject: Re: [j-nsp] Juniper Netflow
Curious... Are
Hi,
Does anyone know how to configured Diameter protocol on Cisco 7206 router?
Sampel configuratio will be helpful.
BR
Ganesh
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
We do it this way and haven't seen a problem. We have a mix is Cisco and
Juniper.
re0 show configuration forwarding-options
sampling {
input {
family inet {
rate 400;
run-length 0;
max-packets-per-second 7000;
}
}
output {
Servet wrote:
Hi Guys
i have a problem with juniper netflow traffic values, i think there is no
problem about the config and flow-analyser. If i use a cisco device, the
results of snmp polls and results of the flow-analyser are similar
But in juniper; i get 180 mbit/s traffic value
PAP configuration on JUNOS, or at least its documentation, seems very
confusing.
This router is a PPPoE client sitting on a regular (around here,
anyway) DSL connection. It's a J2320 running 9.6R1.13.
I never want to send PAP requests. I only want to respond to PAP
requests from the
Hello Ganesh!
As per my information subject protocol not supported over cisco IOS.
http://www.cisco.com/en/US/products/ps6638/products_data_sheet09186a00804fe332.html#wp30301
Regards,
@$IF
On Thu, Sep 3, 2009 at 5:37 PM, ganesh nagpure gnagpure_m...@yahoo.comwrote:
Hi,
Does anyone know how
11 matches
Mail list logo