I haven't tried looking at the LLDP info during one of the outages but the behavior (interface receives but seems not to send) to match in both cases.
We started having the issue in 9.2 and been on a couple of releases since then without much luck. We've seen the issue on both 10G and 1G ports. We're only running into the issue every couple of months on one of the 3 EX4200's we have in service. We're only using a couple of ports on each. If you find a fix please be sure to share it! Thanks, Jay -----Original Message----- From: Bacon, Harrison [mailto:hba...@umflint.edu] Sent: Wednesday, April 14, 2010 9:17 AM To: 'Jay Hanke'; juniper-nsp@puck.nether.net Subject: RE: [j-nsp] EX 4200-24F Not forwarding on 10 G ports after software update Jay, Sounds similar to what I've been dealing with since September 2009 on a pair of EX-4200 24F's. If it is the same bug you will notice that the SFID will spike to around 50%, a 'Show lldp neighbor' from the bugged router will see the upstream router but running the same command on the upstream router will not see the bugged router. A reboot will fix the issue as well as some undocumented ATAC commands but the only real solution I found is in the firmware. Anything newer than 9.3R2.8, from my experience, will bug out between 1-3 weeks after uptime. Juniper has replaced both units to try and fix the issue as they were thinking it was something in the revision of hardware but both of the 4200-24f's still bug out if the firmware is newer than I mentioned. As of right now, Juniper RMA'd a spare unit that I'm to run on older firmware and move all my connections to for when that bug triggers; that way the bugged unit can be debugged as much as ATAC wants and I don't have to worry about downtime. Good luck, -Harrison -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Jay Hanke Sent: Thursday, April 01, 2010 10:47 AM To: juniper-nsp@puck.nether.net Subject: [j-nsp] EX 4200-24F Not forwarding on 10 G ports after software update We upgraded a EX 4200-24F from 9.2R3.5 to 9.5S1.2. After the update everything took and all interfaces came back up with the exception that the 10G interface was not forwarding packets or frames. The 1 G ports all came up and forwarded fine. We rolled the software back to 9.2R3.5 and the everything worked immediately after the reload. Has anyone run into anything similar? Thanks, Jay _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp