[j-nsp] Filtering RIB - FIB Routes

Hi everyone, I'm new to JUNOS and would like to enquire if it's possible to filter routes found in the RIB from going onto the FIB? This is on a J4350 box running 10.3R1.9 in Packet Mode (MPLS configured and enabled). The RIB routes are a mixture of BGP, OSPF and STATIC routes. And in

Re: [j-nsp] Filtering RIB - FIB Routes

On Sun, Nov 21, 2010 at 05:02:58PM -0800, Lawrence Wong wrote: Hi everyone, I'm new to JUNOS and would like to enquire if it's possible to filter routes found in the RIB from going onto the FIB? This is on a J4350 box running 10.3R1.9 in Packet Mode (MPLS configured and enabled).

[j-nsp] Route Import/Export vs BGP-over-LT

Hi everyone, In a scenario whereby there are multiple routing-instances (virtual routers) on the same box, I guess I can either: a. perform route import/export between the routing-instances or b. use a LT tunnel to tie the routing-instances together and then run BGP between the

Re: [j-nsp] Filtering RIB - FIB Routes

Thanks Richard. I've read through the JUNOS docs as well, but couldn't seem to figure out how to limit the context of the filtering to the routing-instance as the routing-policy is specified in the global configuration and not routing-instance. i.e. the box has a routing-instance A = BGP

Re: [j-nsp] Data Plane Memory in JUNOS 10.3R1.9

Hi Tim, Thanks, but nope, no effect. :( Best regards, - Original Message From: Tim Eberhard xmi...@gmail.com To: Lawrence Wong lawrencewon...@yahoo.com Cc: juniper-nsp@puck.nether.net Sent: Mon, November 22, 2010 1:43:44 AM Subject: Re: [j-nsp] Data Plane Memory in JUNOS 10.3R1.9 Any