Op vrijdag 21-01-2011 om 00:27 uur [tijdzone +], schreef Bill
Blackford:
> I have some customers I bring in on tagged vlans through a single physical
> interface and terminate on a router at layer3 in RVIs. I can't poll interface
> stats (bandwidth) in RVIs, SVIs, etc. Since I will be migrati
Hi Vlad,
I'm attaching the snippet of 6PE sample configuration.
Hope this help!
Regards,
Hangu
2011/1/21 Vlad Ion
> Hi,
>
> Can anyone please lend me a hand with a sample configuration for 6PE on
> J-series routers since Google was not helpful at all so far in this quest
> of
> mine?
>
> This
I have some customers I bring in on tagged vlans through a single physical
interface and terminate on a router at layer3 in RVIs. I can't poll interface
stats (bandwidth) in RVIs, SVIs, etc. Since I will be migrating these from an
EX to an MX and thus terminating at layer3 in IRBs, can I poll ba
Hi,
Can anyone please lend me a hand with a sample configuration for 6PE on
J-series routers since Google was not helpful at all so far in this quest of
mine?
This is my first email on this mailing list so please forgive me if I didn't
follow to the letter any particular mailing rules there might
The more important question is IP address space. Is there conflicting IP
space at the two companies? If so how can it be addressed? If the
addresses can't be changed this pretty much guarantees that the topologies
will not merge. If that's the case the choice of protocol BGP or ospf at
the edge
Hy Syed,
In my opinion, the best would be to make a unique OSPF domain.
I guess that these two networks are area 0.0.0.0 each. If the size of
the resulting network is not too big, you can think in create a unique
Area 0.0.0.0 ospf network. If not, it would be more efficient to think
in multi
If you are trying to merge both networks just use OSPF, you don't need to
redistribute OSPF into OSPF. Remember that the OSPF process number can be
different on each router while belonging to the same OSPF topology.
If you are trying to communicate both networks and those are administered by
diffe
Hi,
sorry about cumbersome subject, at least it's informative :) However,
has anyone seen an issue with Juniper M20 where alarms("show chassis
alarms", "show system alarms") do not clear althought problem itself
is not present any more? I have a Juniper M20 router(JUNOS 9.4R4.5),
which has two AC P
8 matches
Mail list logo