Hi every body
I’m going to create the configuration for PPP over l2tp tunnel in M10i
router to let it terminate ADSL sessions (LNS) using Multiservice card which
has to be installed to support this feature. If anyone deployed such service
before over this model or any M-Series router pl
>
> At the same time, is it possible to monitor the bandwidth utilisation of each
> LSP on the EX series using SNMP/MRTG (and if so, may I enquire which OID
> should
> we be looking at)?
>
Look here
http://www.oidview.com/mibs/2636/MPLS-MIB.html
[paak@observer1 ~]$ snmpwalk -v2c -c
Apologies for responding to my own post - a helpful person offline already
answered my issue...
I was missing:
4200#
Chassis
aggregated-devices {
ethernet {
device-count 2
Sorry for the noise folks...
Paul
-Original Message-
From: juniper-nsp-boun...@puck.nether.net
[mai
Hi there.
I have a LAG setup between an ERX310 and a EX4200 and cannot pass traffic.
Physical link is up/up and wondering what is wrong with my config? ;)
Thanks,
Paul
ERX310
interface gigabitEthernet 1/0
mtu 9000
duplex full
speed 1000
lacp active
interface lag Inter
> We are currently exploring the feasibility of using the EX3200/4200 series
> switches as simple MPLS PE/P devices.
>
> We noticed that MPLS support in the EX series seems limited to L2 CCC
> functions.
> (ref:
> http://www.juniper.net/techpubs/en_US/junos10.4/topics/reference/general/ex-seri
Hi everyone,
We are currently exploring the feasibility of using the EX3200/4200 series
switches as simple MPLS PE/P devices.
We noticed that MPLS support in the EX series seems limited to L2 CCC
functions.
(ref:
http://www.juniper.net/techpubs/en_US/junos10.4/topics/reference/general/ex-seri
6 matches
Mail list logo