[j-nsp] EX series and ipv6 multicast / mld.. Doesn't forward with IGMP-SNOOPING enabled

Has anyone here tested ipv6 multicast on the EX4200 platform to only find that it doesn't forward IPv6 multicast when IGMP-SNOOPING is enabled? I found a bug for this on the EX8200 series 10.4 release saying it was fixed, but the EX4200 still doesn't work. Has anyone tested? __

Re: [j-nsp] MTU issue between juniper routers

Hi Pekka, I checked this , but there are no dropped packets by the loopback filter policers : show firewall filter protect-RE Filter: protect-RE Counters: NameBytes Packets bgp-traffi

Re: [j-nsp] VPLS scalability question.. OTV answer?

Hi, On MX-Series you do not need any kind of tunnel services, nor deactivating any port. The LSIs are created on the run, and there is no limit - I have run a MX960 with 400 VPLS-Instances (independent, not vlan in a virtual switch) without any matter. Performance was almost linerate. Tom On 2

Re: [j-nsp] MTU issue between juniper routers

On Fri, 25 Mar 2011, meryem Z wrote: - MTU on Ge interface is configured to 4484 on both ends of the links. but ping (from P to PE ) greater than 1600 bytes fails. - I checked interfaces configuration , and also did a "show interfaces" to verify the effective mtu value used. everything is ok. -