Re: [j-nsp] ex4200 egress filter

* Richard A Steenbergen No comment on how to reproduce it, at least until they fix it and ok the release of details. No PSN yet, but basically it's just another magic packet of death which crashes the FPCs, similar to the last NetBIOS issue. Almost all of our testing is on EX8200, but

[j-nsp] SRX destination-nat ping

Hello, Is there a way of forwarding pings destined for a destination-nat address to loopback, or, otherwise respond to them? Thanks, Scott ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

[j-nsp] Code upgrade to 10.4R4.5

Hi list, Tried to upgrade a M7i from 9.5R1.8 to 10.4R4.5, but validation failed: Using jbase-10.4R4.5.tgz [: /var/validate/chroot/tmp/jbase/packages/jbase-10.4R4.5: unexpected operator Verified manifest signed by PackageProduction_10_4_0 Using

Re: [j-nsp] Code upgrade to 10.4R4.5

I'm sure someone from Juniper will say that going forward like this isn't supported. I recommend skipping the validate step and making sure you have good oob. You can also try to find something where the upgrade path is supported, in theory you need to jump to 10.0 before 10.4 but i've found

Re: [j-nsp] Code upgrade to 10.4R4.5

On Wed, 11 May 2011, Jared Mauch wrote: I'm sure someone from Juniper will say that going forward like this isn't supported. I recommend skipping the validate step and making sure you have good oob. You can also try to find something where the upgrade path is supported, in theory you need

Re: [j-nsp] Code upgrade to 10.4R4.5

Thanks all for the reply. I just did an intermediate level and it went through, but still with the message unexpected operator, which I've never seen before. Just want to make sure there is no consequence with the no-validate option. Cindy - Original Message - From: Justin M.

Re: [j-nsp] SFP Status and Conditions

On Wed, May 11, 2011 at 03:39:39PM -0300, Giuliano Medalha wrote: People, Is it any possible to monitor the SPF status of an EX switch ? Is there some commands to see SFP or XFP or SFP+ status ? - power - model - temperature Some SFP supports DD for verification. Juniper supports