Re: [j-nsp] QinQ between Cisco/Juniper with layer2-tunneling and VPLS

2012-01-25 Thread Sebastian Wiesinger
* Payam Chychi [2012-01-25 00:36]: > On 12-01-24 03:14 PM, Sebastian Wiesinger wrote: > >* Chris Kawchuk [2012-01-25 00:10]: > >>Heh, then it's a different problem altogether. =) > >> > >>In your VPLS config, do you have any "vlan-id" settings set in the > >>routing-instance? It's a long shot, el

[j-nsp] SRX3600 and "ethernet switching" between multiple reth

2012-01-25 Thread Bao Nguyen
Hello, I have a SRX3600 cluster setup where there are three RETH interfaces. Each of the RETH is physically ties to the outside world, an EX4500 and an EX4200. For simplicity sake, the RETH is physically connected like below and has "vlan-tagging" enable so multiple vlans can terminate on each RE

Re: [j-nsp] Juniper MX40 / MX80 as a edge aggregator

2012-01-25 Thread Matthew S. Crocker
If only the MX80 could terminate an OC-3 ATM circuit with RFC1483 PPPoE sessions. Sigh, I'm stuck using ancient EoL gear. - Original Message - > From: "Giuliano Medalha" > To: "Remco Bressers" > Cc: juniper-nsp@puck.nether.net > Sent: Wednesday, January 25, 2012 9:17:36 AM > Subject:

Re: [j-nsp] Juniper MX40 / MX80 as a edge aggregator

2012-01-25 Thread Paul Stewart
We are just getting ready to roll some of these out You need additional licenses for the PPPOE portion (up to three licenses). Nobody at Juniper to date has been able to tell us specifics about these licenses and what *exactly* you require them for so we bought all three so far figuring we'd

Re: [j-nsp] Juniper MX40 / MX80 as a edge aggregator

2012-01-25 Thread Giuliano Medalha
You need to ask him to add the following licensed to the QUOTE: S-SA-8K S-MX80-SA-FP S-MX80-SSM-FP It works fine for me. Att, Giuliano On Wed, Jan 25, 2012 at 12:11, Remco Bressers wrote: > Hi list, > > We are in the process of selecting an edge platform for the following > featureset : >

[j-nsp] Juniper MX40 / MX80 as a edge aggregator

2012-01-25 Thread Remco Bressers
Hi list, We are in the process of selecting an edge platform for the following featureset : - Routing BGP/OSPF with less than 10K routes - PPPoE for >5000 ethernet customers - >5000 traffic policies on these customers. We want to be able to select a traffic profile (2Mbps to GigE) per PPPoE custo

Re: [j-nsp] Does MS-PIC (Type2 MultiServices 400) work in MX-FPC2?

2012-01-25 Thread Jonas Frey (Probe Networks)
Chuck, its not listed on the supported PICs. There are only sonet PIC's listed (not even ethernet ones) so i guess it will very likely not work. I guess your only option is to go with the MS-DPC. Am Dienstag, den 24.01.2012, 17:47 -0500 schrieb Chuck Anderson: > Is it possible to reuse a Type2 M