Hi,
I installed a new Juniper EX2200 today, running Junos 11.4R5.7.
Upon every commit I get the following error message (but the commit succeeds):
root@testsw# commit check
LIBJNX_SNMP_ENGINE_SCAN_FAILURE: snmp_engine_read: fscanf :
/var/db/snmp_engine.db scanning: full_engine_id Error: Unknow
Hi Ben,
On Thu, Feb 21, 2013 at 1:00 PM, Ben Dale wrote:
>
>> Which SNMP trap *category* in JUNOS includes the three
>> POWER-ETHERNET-MIB (RFC3621) traps?
>>
>> [1] pethPsePortOnOffNotification
>> [2] pethMainPowerUsageOnNotification
>> [3] pethMainPowerUsageOffNotification
>
> Couldn't find any
> Which SNMP trap *category* in JUNOS includes the three
> POWER-ETHERNET-MIB (RFC3621) traps?
>
> [1] pethPsePortOnOffNotification
> [2] pethMainPowerUsageOnNotification
> [3] pethMainPowerUsageOffNotification
Couldn't find any doco, but a quick test in the lab shows that category
"chassis" pi
Hi all,
I feel like I should have been able to find the answer to this myself
but I haven't been able to dig anything up.
Which SNMP trap *category* in JUNOS includes the three
POWER-ETHERNET-MIB (RFC3621) traps?
[1] pethPsePortOnOffNotification
[2] pethMainPowerUsageOnNotification
[3] pethMainP
On Wed, Feb 20, 2013 at 10:44 PM, Robert Hass wrote:
> I just started testing Firefly (SRX on VMware) and occurred problem that I
> cannot connect with JunOS Pulse due to no license:
[...]
Resolved.
I have to upgrade to JunOS Pulse v 4.0.
Rob
___
juni
Hi
I just started testing Firefly (SRX on VMware) and occurred problem that I
cannot connect with JunOS Pulse due to no license:
Feb 20 15:41:53 firefly httpd-gk: DYNAMIC_VPN_LICENSE_CHECK_FAILED:
Dynamic VPN license check failed for user test
Feb 20 15:41:53 firefly httpd-gk: DYNAMIC_VPN_AUTH_N
On 20-02-13 16:41, Grzegorz Janoszka wrote:
> I was looking for Juniper command to set IPv6 ND parameters, like ie set
> system arp aging-timer for v4. The only thing I found was under
> protocols router-advertisement interface and there I set reachable-time
> and retransmit-timer. However that ena
I was looking for Juniper command to set IPv6 ND parameters, like ie set
system arp aging-timer for v4. The only thing I found was under
protocols router-advertisement interface and there I set reachable-time
and retransmit-timer. However that enabled sending RA on that interface
which was not my
Hey all,
I've just noticed something interesting in the SRX Branch Datasheet located
at: http://www.juniper.net/us/en/local/pdf/datasheets/1000281-en.pdf
Previous to this version, the SRX240B could do 32k BGP routes, and the
SRX240H could do 64k.
The new version just lists 600k (for both version
9 matches
Mail list logo