I have some issues with passive FTP on a SRX running Junos 10.4r6
I was interested, in this KB
http://kb.juniper.net/InfoCenter/index?page=contentid=KB8193
But it says the article is it in review and can't be viewed. Just wondering if
anyone knows any info about what is in the KB.
My issue
Yes I have had issues with numerous ALGs. It has just stopped working out of
the blue which is very weirder.
Unfortunately it's not feasible to upgrade the firewall just yet as it is a
very busy firewall with 24/7 connectivity requirements.
Sent from my iPad
On 06/03/2013, at 7:15 PM, Mark
So, TRIO cards have ability to set a overhead offset for their shapers.
By default the offset is +24 bytes to account for preamble, frame start
and FCS.
This is a good thing, as the shapers now match actual L1 rates.
You can change this if needed if what you actually need to do is set
target
Hi,
Could somebody advice whether it is possible to use the same
static p2mp lsp for BUM traffic in two different BGP-based VPLS
instances?
Jerzy Pawlus
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
Hi,
we configured the link-aggregation on two switches EX3200 with JUNOS
software 10.0R4.7.
We configured the aggregated interface (ae0), containing three ge
interfaces (ge-0/0/12, ge-0/0/14, ge-0/0/16).
At the operational level, the state of the aggregated interface (show
interfaces ae0
Filippo,
Can you send the output of show lacp interface ae0?
Thanks
- Brian
-Original Message-
From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-
boun...@puck.nether.net] On Behalf Of Filippo Cugini
Sent: Wednesday, March 06, 2013 8:16 AM
To:
On Wed, Mar 6, 2013 at 9:15 AM, Filippo Cugini filippo.cug...@cnit.it wrote:
However, when we send traffic on the aggregated link, just one ge works, and
we experience packet loss when we exceed the throughput of 1000mbps.
Indeed, the statistics of all interfaces show that only the ge-0/0/12 is
Have you configured a has key similar to below?
xx...@router.loc show configuration forwarding-options
hash-key {
family inet {
layer-3;
layer-4;
}
}
-Bill Blackford
__**_
juniper-nsp mailing list
How many flows are you sending?
sreepad | jncip-sp
cube 4.3.1.2.3 | xtn 10689
eabu-aa | juniper
exora | bangalore
yearn learn earn
-Original Message-
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Filippo Cugini
Sent: Wednesday,
Hi Experts,
Does someone has a chance to mirror a GE port in switch EX4200 ?
*Kind regards,*
*Rachid DHOU*
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
I am currently fighting RTPERF_CPU_THRESHOLD_EXCEEDED messages in all
of my branch SRX devices, and I need some tip how to debug further:
As far as I understood, this messages are generated by the fwdd,
and so I thought I could find out
11 matches
Mail list logo