[j-nsp] Srx 240 ipsec site to site

Dear Group, I have a small customer requiring a VPN between two of the sites, One site is so remote where in we have only 3g internet connection available. other site which is considered to be the main site is having internet over an ADSL link . In essence both sides are getting dynamic IP addres

Re: [j-nsp] juniper-nsp Digest, Vol 126, Issue 41

Geen idee...volgens mij is daar wat gefoefeld toenertijd. Mss weet Raf meer ? /W -Original Message- From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of juniper-nsp-requ...@puck.nether.net Sent: Monday, May 06, 2013 6:00 PM To: juniper-nsp@puck.nether.net Sub

[j-nsp] SRX 240 Site to Site Vpn Question

I have a small customer requiring a VPN between two of the sites, One site is so remote where in we have only 3g internet connection available. other site which is considered to be the main site is having internet over an ADSL link . In essence both sides are getting dynamic IP address , can i hav

Re: [j-nsp] auto-negotiation on 1000BASE-X ports

1000Base-X can negotiate flow control. But, an interesting part of autoneg is Remote Fault Notification: one of the fibers in your 2 fibers link breaks, and the link becomes unidirectional; the side that sees its receiving fiber down sends a frame to notify the other side (which didn't see anyt

[j-nsp] auto-negotiation on 1000BASE-X ports

Hi, Juniper routers support enabling(this is the default setting) and disabling auto-negotiation both on 1000BASE-T(copper) and 1000BASE-X(optical) interfaces. Auto-negotiation on copper ports makes sense because copper ports(for example on tri-rate DPC's on MX960) support 10BASE-T and 100BASE-TX

[j-nsp] Anyone who use inetzero JNCIE-ENT workbook?

Hi All, Is there anyone who use Inetzero JNCIE-ENT workbook. Is it good enough. Last year, I buy proteus JNCIE-SP for my JNCIE-SP preparation.I don't think it's good. not a complete lab .so this time i don't want to choose proteus again. -- Best Regards, Bruno