[j-nsp] Problem to test VPLS between two Site

Hi , Wishes all are fine. I am getting problem  about testing of VPLS service  (BGP and LDP based ) between two router and my VPLS tunnel is up but i can not reach local LAN. i am little bit confused about testing between PC. May i need to connect direct PC on  ge-1/1/9 for test or need to

Re: [j-nsp] R: RE : multicast issue

- Original Message - From: david@orange.com To: dim0sal dim0...@hotmail.com Cc: juniper-nsp@puck.nether.net Sent: Tuesday, July 16, 2013 8:49 PM Subject: Re: [j-nsp] R: RE : multicast issue If you can't start/stop manually mcast streams you will never have stable counters and

Re: [j-nsp] srx210 interesting difficulty with managed layer 3 setup .

Hello Georgios , Thank you . THis information is quite helpful . Twyl , JimL On Tue, 16 Jul 2013, Georgios Vlachos wrote: You have two options actually: L2circuit (Martini circuit) or VPLS (BGP based) over MPLS over GRE over IPsec! p.s. watch out for fragmentation

[j-nsp] replacing M5 RE-3.0 hard drive

I have a Juniper M5 whose hard drive just failed. The drive appears to be a Fujitsu MHT2030AT. Can I just simply swap in a new hard drive and partition it? Has anyone tried replacing it with a solid state equivalent and if so, what did you use? Antonio Querubin e-mail: t...@lavanauts.org

Re: [j-nsp] replacing M5 RE-3.0 hard drive

Yes, just make sure to use a 2,5 drive. SSD is fine, too. http://juniper.cluepon.net/index.php/Replacing_the_harddisk_with_solid_state_flash Am Mittwoch, den 17.07.2013, 09:42 -1000 schrieb Antonio Querubin: I have a Juniper M5 whose hard drive just failed. The drive appears to be a

Re: [j-nsp] Problem to test VPLS between two Site

IIRC unless you disable local switching you need to add the interface to the site config as well as to the instance. On 7/17/13 1:30 AM, Md. Jahangir Hossain wrote: Hi , Wishes all are fine. I am getting problem about testing of VPLS service (BGP and LDP based ) between two router