[j-nsp] SRX control-link and link is up without cable connected

Hi I just want to establish control-link between two SRX5800 and I have issue that link is always up - even without fiber patchcord connected. Should I use different SFPs ? E.g.JX-SFP-1GE-SX ? I used EX-SFP-1GE-SX transceivers. Did anybody had similar issue ? Rob

[j-nsp] EX2200 rate limiting per port ?

I'm looking for a small switch that can rate limit traffic in and out per port with a granularity of 5mb or less. Typical application would be ethernet distribution within a building where each office gets a (possibly different) amount of bandwidth. Can the EX2200 do this? Thanks, Joe

Re: [j-nsp] Outbound collision errors ?

On 15/10/2013 15:18, Christian de Balorre wrote: Hello, Before anything, make sure both ends have identical autoneg or duplex/speed settings. Also you can run a tdr test (request diagnostic tdr) from the EX. Christian. Will try a TDR test, forgot about that in all the troubleshooting mist ...

Re: [j-nsp] Peering Configuration

Thanks everyone for your on and off list replies, everyone's help has been greatly appreciated. This is the configuration I have come up with [1]. If anyone has any further input on this I'm all ears. Kind regards, James. [1] http://paste.org/flat/68022 _

Re: [j-nsp] Outbound collision errors ?

Hello, Before anything, make sure both ends have identical autoneg or duplex/speed settings. Also you can run a tdr test (request diagnostic tdr) from the EX. Christian. Le 15/10/2013 15:33, Ben a écrit : Hi, This issue appears to be beyond the collective intellect of JTAC (I'm getting the

[j-nsp] Outbound collision errors ?

Hi, This issue appears to be beyond the collective intellect of JTAC (I'm getting the usual wall of silence you get when the poor engineer is stumped !). So before I complain to Juniper and escalate to someone who knows their * from their elbow, I thought I would ask here first ! Mr Googl