+1
On Fri, Oct 25, 2013 at 3:29 PM, OBrien, Will wrote:
> show chassis fpc is a start.
>
> you can run various diags on the fpc pics themselves as well.
>
> On Oct 25, 2013, at 2:25 PM, Keith wrote:
>
> > Is there a command on JunOS similar to the cisco command:
> >
> > show controller utilizat
show chassis fpc is a start.
you can run various diags on the fpc pics themselves as well.
On Oct 25, 2013, at 2:25 PM, Keith wrote:
> Is there a command on JunOS similar to the cisco command:
>
> show controller utilization
>
> Thanks,
> Keith
> ___
Is there a command on JunOS similar to the cisco command:
show controller utilization
Thanks,
Keith
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Official scaling numbers says 4,000 for L2TP on MX80.
http://www.juniper.net/techpubs/en_US/release-independent/junos/information-products/pathway-pages/subscriber-access/subscriber-management-scaling-values.xls
PPPoE uses 2 IFL only when there is a VLAN per subscriber.
-Original Message--
4 matches
Mail list logo