Hi list,
I hope to get some experience and tips from you regarding the usage of a
Proxmox cluster using Multicast in a (juniper-based) network. Since our
multicast experience is quite low and was never required before Proxmox
became quickly popular and is meanwhile widely used by our
observed with inline sampling enabled, 1.5m in RIB, and one v4 feed (~250k
active-paths) changing state
11.4R7.5 - 10+ minutes
12.3R8.7 - ~220 seconds
14.2R1.9 - ~200 seconds
YMMV
On Mar 20, 2015, at 1:09 PM, Tan Heng Chai ad...@sg.gs wrote:
Hi J-NSP,
Just wondering if anyone has
Hi J-NSP,
Just wondering if anyone has benchmark/feedback on BGP
convergence times on the MX80 with and without sampling on versions
higher than 11.4R7.5, especially with reference to PR836197 and the
sampling issue?
--
Yours Sincerely,
Tan Heng Chai
Chief Technical Officer - SG.GS
13.3R5 or 14.1R4 are better options
Sent from my iPhone
On Mar 20, 2015, at 14:09, Tan Heng Chai ad...@sg.gs wrote:
Hi J-NSP,
Just wondering if anyone has benchmark/feedback on BGP convergence
times on the MX80 with and without sampling on versions higher than 11.4R7.5,
Depends on the version of code you’re running. At best you’re looking at
minutes and in some cases as much as 10 minutes. With the wrong version of
Code where the sampled bug is still present you might never get routes
installed in the FIB.
The fix applied for the PR does allow for
5 matches
Mail list logo