M,
I've landed a VPN on an SRX 240 cluster but I had to update the config to a
version of 12+ to use the LoopBack as a VPN end-point. believe it was 12.44
but I would check the information sheets on the OS versions. Though I am
unsure of the support on the Virtual Side
Thank you,
*Levi
I've been able to configure an IPsec VPN to connect from within a
virtual router without issue. (external-interface is it's own routing
instance and security zone) The st0.X interface associated to the VPN is
in inet.0 however and OSPF works across it. Effectively I can have a
primary and
Hi All
I have a question about SRX VPN support under virtual router;There are two WAN
links and each link member in different Virtual Router (not inet0), and the VPN
tunnels must be established from both virtual routers
Per to my search I found two conflict results as below;
Below KB
Hi Tore,
However these intial IGMP membership reports are not forwarded to the
EX4550, as it is not a multicast-router interface (from the EX4200s'
points of view, at least). So the EX4550 won't be able to learn of the
existence of the multicast group at all. Also, since the uplink to the
4 matches
Mail list logo