Dear Colleagues,
If I want my rescue configuration to be totally different from the
current config, how do I edit/upload it? Because the request system
configuration rescue save saves the current config as rescue.
I just want a DHCP client on the management interface and some
local
Hello Victor,
You are quite correct that you normally can only save the current
configuration file; however I have just tested your assumption and this
does work.
The only snag was that I couldn't directly SCP the file onto the Juniper
back in the correct directory (I didn't try as root), I put
All,
I've created simpler MPLS ring between a total of 6 MPLS 4550s. My
questions what IP do I use for the Label Switched Path Endpoints. I can't
seem to find a best practice.
Specifically this code
Obfuscated as I'm a little to literal with my descriptions
set protocols mpls
Hi,
replace this set chassis fpc 1 pic 1 port-mirror-instance mirror_reductor with:
set chassis fpc 1 port-mirror-instance mirror_reductor
For whatever reason PM did not work (when I tested it in the past)
when I tried to enable it for a particular pic. After enabling it for
fpc it worked ok.
loopbacks
On 7/2/15, 4:25 PM, juniper-nsp on behalf of Levi Pederson
juniper-nsp-boun...@puck.nether.net on behalf of
levipeder...@mankatonetworks.net wrote:
All,
I've created simpler MPLS ring between a total of 6 MPLS 4550s. My
questions what IP do I use for the Label Switched Path
On 3 Jul 2015, at 12:25 am, Levi Pederson levipeder...@mankatonetworks.net
wrote:
All,
I've created simpler MPLS ring between a total of 6 MPLS 4550s. My
questions what IP do I use for the Label Switched Path Endpoints. I can't
seem to find a best practice.
Specifically this code
Hello everyone,
I have several EX3300s suffering from a strange problem. They run Junos
12.3 and they are far away from their scalability numbers in terms of
number of mac-addresses (6K at maximum) and thorughput. They are mainly
traversed by pppoe subscribers. From time to time and not for every
7 matches
Mail list logo