Re: [j-nsp] No IFL found...

2015-10-19 Thread Chen Jiang
Is this feature(GRE Keepalive) only supported in MPC in MX? On Mon, Sep 28, 2015 at 2:30 PM, Alireza Soltanian wrote: > Hi everybody > > > > A couple of days ago, I sent an email about GRE Keepalive on M10/M20. > > I did some more tests on this case. I am using PE-Tunnel on M10/M20. Tunnel > can

Re: [j-nsp] RE-S-2000-4096

2015-10-19 Thread Chen Jiang
RE-2000 could support about 10M route in RIB. RE-2000 is X86 based RE and MX80/MX104 is PPC based RE. >From raw evaluation, in JUNOS PPC RE is about 1/3 performance vs. X86 RE for same frequency, On Wed, Oct 14, 2015 at 9:16 PM, Colton Conor wrote: > How many full routes can two RE-S-2000-4096

Re: [j-nsp] Link with errors, how to fast detect ?

2015-10-19 Thread james list
Hello Indeed it s not flapping the interface most of the times, just crc errors... Cheers Il 19/Ott/2015 20:49, "serge vautour" ha scritto: > Hello, > > If you're worried about the link flapping, just set a Down-->Up hold-timer > directly on the interface. > > > http://www.juniper.net/documentat

Re: [j-nsp] Link with errors, how to fast detect ?

2015-10-19 Thread serge vautour
Hello, If you're worried about the link flapping, just set a Down-->Up hold-timer directly on the interface. http://www.juniper.net/documentation/en_US/junos15.1/topics/reference/configuration-statement/hold-time-edit-interfaces.html Serge On Mon, Oct 19, 2015 at 11:33 AM, james list wrote: >

Re: [j-nsp] Link with errors, how to fast detect ?

2015-10-19 Thread james list
Hello Alex, interface do not flap at all every time... Sometimes ospf neighbor is up and revenue traffic of the customer (tcp traffic) is loss. Cheers James 2015-10-19 17:24 GMT+02:00 Alexander Arseniev : > Hello, > Not sure what exactly You are trying to achieve, looks like You want to > delay

Re: [j-nsp] Link with errors, how to fast detect ?

2015-10-19 Thread Alexander Arseniev
Hello, Not sure what exactly You are trying to achieve, looks like You want to delay announcing this link into OSPF (and by extension, using it for transit traffic) unless it has been stable for 3 secs. You could achieve this by defaulting this link to broadcast (if it is currently configured a

[j-nsp] Link with errors, how to fast detect ?

2015-10-19 Thread james list
Dear experts, I currently have a wan link between two MXs that sometimes is experiencing errors. I’ve on top of the link OSPF (timer 1/3) as routing protocol and I’d like to find out any possible way to exclude the link when errors are in place and below to the 3 seconds of the OSPF timers. I’