Looks good, I get one made up and give some feedback. -----Original Message----- From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Chuck Anderson Sent: 07 May 2018 02:25 To: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] Equipment Labelling
We think a M3.5-.07 is the right screw, but a 6-32 fits well enough as well. On Sat, May 05, 2018 at 10:31:23PM +0000, Sweetser, Frank E wrote: > So after a few rounds of design, Chuck and I came up with this simple bracket > that mounts onto the threaded stud in the middle of the mounting brackets for > many (all?) of the 1U EX and QFX switches: > > > https://www.thingiverse.com/thing:2893741 > > > If you've got a 3D printer handy, this should give you an 18mm by 40mm > space for labelling. If you don't have a 3D printer handy, now's your > chance to convince your boss to buy one for work purposes 😉 > > > Frank Sweetser > Director of Network Operations > Worcester Polytechnic Institute > "For every problem, there is a solution that is simple, elegant, and > wrong." - HL Mencken > > > ________________________________ > From: juniper-nsp <juniper-nsp-boun...@puck.nether.net> on behalf of > Sweetser, Frank E <f...@wpi.edu> > Sent: Thursday, May 3, 2018 10:07 PM > To: Anderson, Charles R; juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] Equipment Labelling > > That should be pretty straightforward to slap together something simple. > Anyone know the actual size of the threaded hole? > > > Frank Sweetser > Director of Network Operations > Worcester Polytechnic Institute > "For every problem, there is a solution that is simple, elegant, and > wrong." - HL Mencken > > > ________________________________ > From: juniper-nsp <juniper-nsp-boun...@puck.nether.net> on behalf of > Chuck Anderson <c...@wpi.edu> > Sent: Thursday, May 3, 2018 9:39 AM > To: juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] Equipment Labelling > > Nice. That screw hole on the front of the rack ear is screaming for > someone to make a 3D printed label tag. > > On Thu, May 03, 2018 at 08:19:59AM -0500, Chris Wopat wrote: > > Our current QFX5100 label method: > > > > https://i.imgur.com/kRVojXk.jpg > > > > We have a label on both the left and right side, sticking out as a > > tab on left and folded over on right. in both cases the label was > > adhered prior to putting the ears on. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp