Re: [j-nsp] MX80 Input Scheduling/Shaping

2018-10-23 Thread Eric Van Tol
Posting here for posterity. The issue turned out to be that ingress scheduling can only be enabled on one MIC in the MX80. I had it enabled on both MICs and once I removed 1/0 and 1/1, the errors seem to have gone away. I only discovered this information in the Juniper MX Series, 2nd Edition bo

Re: [j-nsp] MTU issue

2018-10-23 Thread Alain Hebert
    Well,     We had the same issue when switching one of our so called "wavelength" from L2 (1536) to MPLS/Jumbo (9216).     After the usual Level 1 incompetence, we got tired and asked to bumped it to engineering, we found out they had some active booster that had a limitation of 2000 byte

Re: [j-nsp] MTU issue

2018-10-23 Thread Nikos Leontsinis
Check CoS config and the Mpc you are using. Is there fusion in the picture? > On 23 Oct 2018, at 07:55, Enoch Nyatoti via juniper-nsp > wrote: > > Hi, > Do you have a loopback filter with icmp rate limiting on the MX router? If so > try to deactivate and test. > > Best regards > E.N. > > >