[j-nsp] MIC3-3D-1X100GE-CXP ports won't light up.

Hi all-- New to this particular MIC. I've got two Juniper MX480s running RE-S-1800x4s with 15.1R7.9 on SCBE2s with MPC3E cards, and I'm trying to use MIC3-3D-1X100GE-CXP with CXP-100GBASE-SR10 transceiver. First time, like I said. Got a 24 Fiber MTP Cable, Multimode OM3, 100Gb Female to

Re: [j-nsp] MX960 power supply stopped during ISSU

Power supplies have firmware on them ;) Regardless - I don't know much about the MX960 arch but do you have enough power supplies to maintain N+1 at full tilt? > -Original Message- > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf > Of Aaron Gould > Sent:

[j-nsp] MX960 power supply stopped during ISSU

Last night I had a successful ISSU upgrade. BUT. "show chassis alarm" showed me that PEM0 power supply had issues. Searching logs didn't turn up any previous issues so I think that this happened during the ISSU process. Anyway ever seen something like that before? I would've thought that a

Re: [j-nsp] Avoid transit LSPs

Yes it can, but it won't scale. There are lots of PE routers with the same situation. I was expecting for a simple configuration knob to avoid detour LSPs but there seems to be none. Breaking the OSPF areas could be an option but I don't see anything working differently if I export the TED via

Re: [j-nsp] Avoid transit LSPs

> From: Luis Balbinot > Sent: Monday, January 28, 2019 1:39 PM > > I have many LSPs from P1 to P4 and all have FRR protection (Juniper FRR, 1:1). > Even with two distinct paths from P1 to P4 (both with much lower IGP > metrics) I get some detour LSPs setup on PE1. PE1 is a low-end ACX5k with >