Can I use the web generated link to send the file to the SRX box? https://cdn.juniper.net/software/junos/15.1X49-D230/junos-srxsme-15.1X49-D230-domestic.tgz?SM_USER=xx...@bluezonejordan.com&__gda__=1603804883_8b2ff7114f49ebd48787c32ba78d7720
On Wed, 28 Oct 2020 at 19:42, Mohammad Khalil <eng.m...@gmail.com> wrote: > Hi Nicolas > The device is remote from my side so I will have to upload the image > remotely , what is the best way to do that? > > > On Mon, 26 Oct 2020 at 01:41, Nicholas Oas <nicholas....@gmail.com> wrote: > >> Yes do an upgrade, that code is ancient. Anything below 15.1X49-D150 is >> pretty crummy. Watch out for whatever changes they made with config stanza, >> vlans, and dhcp services. Do an upgrade within 15.1X49 first. >> >> Once you're past those 15.1X49 milestones its pretty solid. Stay off of >> 17.x I'm happily on 20.3R1.8. >> >> >> >> On Sun, Oct 25, 2020 at 4:46 PM Mohammad Khalil <eng.m...@gmail.com> >> wrote: >> >>> Thanks all for the kind replies. >>> Adding to that , the FW got hanged and I cannot access it remotely unless >>> it is rebooted manually. >>> It keeps working for couple of days and then it is back again to hang >>> status. >>> Current SW version is 15.1X49 >>> >>> Any recommendations ? Should I do an upgrade? >>> >>> BR, >>> Mohammad >>> >>> On Fri, 23 Oct 2020 at 01:31, <mzenar...@dosarrest.com> wrote: >>> >>> > I'd check for any firmware bugs that may have been triggered and >>> caused a >>> > reboot. >>> > >>> > On Oct 22, 2020 15:22, Emille Blanc <emi...@abccommunications.com> >>> wrote: >>> > >>> > What was the reported reboot reason? >>> > You will find that in 'show chassis routing-engine' >>> > >>> > -----Original Message----- >>> > From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On >>> Behalf >>> > Of Mohammad Khalil >>> > Sent: Thursday, October 22, 2020 3:13 PM >>> > To: Juniper List >>> > Subject: [j-nsp] SRX300 Sudden Reboot >>> > >>> > Greetings >>> > I have SRX300 which is running normally for long time except for the >>> last >>> > two weeks where I have suffered from sudden reboot. >>> > Model: srx300 >>> > Junos: 15.1X49-D70.3 >>> > JUNOS Software Release [15.1X49-D70.3] >>> > >>> > Nothing has been changed or added and nothing in the log messages is >>> > related to this. >>> > As well , no active alrams and temperature levels are fine: >>> > tbzadmin@FW-PB-NEW# run show chassis environment >>> > Class Item Status Measurement >>> > Temp Routing Engine OK 45 degrees C / 113 >>> degrees >>> > F >>> > Routing Engine CPU OK 58 degrees C / 136 >>> degrees >>> > F >>> > Power Power Supply 0 OK >>> > >>> > What could be the issue? >>> > >>> > Much appreciated. >>> > _______________________________________________ >>> > juniper-nsp mailing list juniper-nsp@puck.nether.net >>> > https://puck.nether.net/mailman/listinfo/juniper-nsp >>> > >>> > _______________________________________________ >>> > juniper-nsp mailing list juniper-nsp@puck.nether.net >>> > https://puck.nether.net/mailman/listinfo/juniper-nsp >>> > >>> > >>> > >>> _______________________________________________ >>> juniper-nsp mailing list juniper-nsp@puck.nether.net >>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>> >> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp