cheers and merry xmas
Alberto Santos CCIE #26648
JNCIP-SP
*"...Fix your DNS, make it dual-stack, take your mail server and make it
dual-stack, take your web server and make it dual-stack..." by Randy
Bush/RIPE IPv6*
On 22 December 2016 at 15:15, Vincent Bernat wrote:
> Hey!
>
>
Hi,
I've seem this before, usually it happens when the active and standby are
config with the same chassis-id 0 or 1 and/or the standby MX is also
configured with active mode.
cheers,
Alberto
On 11 December 2015 at 17:49, Marcelio Webster
wrote:
> Hi!
>
>
> Send us the con
Hi,
is there anyone running ng-mvpn/mldp + Inter AS option B or C that could
share a working config from a PE/RR/ASBR?
Best Regards,
Alberto
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
d: No
Incoming label: 800080, Outgoing label: 82
Local interface: vt-1/1/10.1049344, Status: Up, Encapsulation: VPLS
Description: Intf - vpls VPN2000 local site 3 remote site 1
BR
Alberto
___
juniper-nsp mailing list juniper
Hi,
Do you know if it is possible to clear show class-of-service fabric
statistics summary ?
thx
BR
Alberto
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Hi,
Has anyone been able to run mcast over emX interfaces on Olive/VMware? I
read some articles about it and it would be supported, but it requires a
Kernel module (which I can't find syscall.ko) and set some mcast flags in
the Kernel.
Does it really work? or should I try QEMU instead?
cheers
A
System L StateHold (secs) SNPA
em1.0 ..0004 1 Up8
ca:4:25:d3:0:54
BR
Alberto
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Hi,
it looks like a possibility, but the remote IP address keeps changing
because it is dialup connection. can't monitor the next hop.
BR
*Alberto Santos *
CCIE #26648
JNCIS-SP - ITIL-F
*"...Fix your DNS, make it dual-stack, take your mail server and make it
dual-stack, take your
nce any in the
past? please send your thoughts, just keep in my that I can't run any IGP
over the tunnel .
BR/Alberto
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
there is no LDP adj between them meanwhile I'm still reading about
that :D
as I told you it still a guess.
Can you send some printouts?
>From both ASBR:
sh mpls for
sh mpls ldp bin
sh mpls ldp nei
sh ldp da
sh ldp nei
sh route table inet.3
sh mpsl table mpls.0
BR,
Alberto
*"...Fix
0.01
JUNOS Software Release [11.2R6.3]
jnxOperatingCPU.9.1.0.0 = 100
jnxOperatingCPU.9.3.0.0 = 100
--
*BR/Alberto*
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Hi,
I'm having trouble config a static route into inet.2 which seats inside a
routing instance,
When I set a IP next hop it doesn't even show up,
set routing-instances X_VRF routing-options rib X_VRF.inet.2 static route
n.n.n.n/27 next-hop n.n.n.n
but if I change it to, for example, reject it wo
son
>
> On 17 December 2011 12:18, Alberto wrote:
>> Hi there,
>>
>> I hope someone can clarify some points
>>
>> I used to pratice IAS with IOS and now I'm testing with junos and the main
>> difference I'm seeing is that on Junos ASBR it need to
Hi there,
I hope someone can clarify some points
I used to pratice IAS with IOS and now I'm testing with junos and the main
difference I'm seeing is that on Junos ASBR it need to signal the Loopback
address via iBGP labeled unicast, I tried to export eBGP learned loopbacks to
ISIS so it can be
14 matches
Mail list logo
