Hello, I'm new - very new - to the Juniper world and have a quick question that I have not been able to resolve myself or find documentation online for.
I'm trying to replace a Cisco with a Juniper for PVC aggregation and have run into a stumbling block finding a workaround for the cisco command - atm route-bridged ip - that is placed on the atm interface. Could anyone offer a suggestion on how to get past this issue? Below are the interface configs for both the Cisco and Juniper currently rt03#sh run int atm1/0.20208 Building configuration... Current configuration : 283 bytes ! interface ATM1/0.20208 point-to-point mtu 9182 ip address 10.252.145.233 255.255.255.252 no ip proxy-arp atm route-bridged ip no atm enable-ilmi-trap pvc 2/208 protocol ip 10.252.145.234 no broadcast vbr-rt 130 64 ! end dslrt01> show configuration interfaces at-0/1/0.2208 encapsulation atm-snap; multipoint; family inet { mtu 4470; address 10.252.145.233/30 { multipoint-destination 10.252.145.234 vci 2.208; } } Thanks -- Chad Whitten [EMAIL PROTECTED] _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp