Hi Brad,
Thanks for the response. I think I'm going to just have to admit defeat
judging by the information laid out in front of me. Jcare wasn't ever an
option for this router so other than maybe turning it into a footrest, I
think it's days as being something useful are over. I may attempt some
Hi all,
Second post from me in the same month! Scary.
So, long story short. Router went offline after a power outage. Didn't come
back. Remote hands consoled in and reported back:
"All four LED's are on permanently. We've unplugged, plugged it back in,
rebooted and rebooted some more. N
Hi group,
I've just been refreshing myself on some CoS bits and pieces and came across
this statement:
"Note: When a source MAC address is learned, the frame that contains the
source MAC address is always sent out on queue 0 while egressing from the
network interface, irrespective of the cl
will resign myself
to DTE testing and push our SE for a demo unit when the time is right.
Thanks again as always.
David
-Original Message-
From: Clay Haynes [mailto:chay...@centracomm.net]
Sent: 31 January 2013 15:57
To: David Gee; juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] MAG2600
Hi group,
I was hoping if one of you could answer me the following question. When it
comes to base functionality, are the features on the MAG2600 identical to
the MAG4610 and above? I appreciate scalability is massively different, but
itÂ’s more the configuration and base features I am worried a
think of at least 5 or 6 usual
suspects who probably know this off the top of their head :P), so just
consider the above as generic advice for when this question comes up
again in the future. :)
--
Richard A Steenbergenhttp://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204
source-prefix-list {
manager_ips except; #
world;
}
}
then {
discard;
}
}
term permit_mng {
then {
count management_count;
accept;
}
}
}
Thanks and look
7 matches
Mail list logo