Hi All,
I hope someone can point me to information on what the process would be to
load an OS version (5.0.3) from a ERX 700 5Gig+ SRP to a ERX 1410 10 Gig
SRP.
Specifically can this be accomplished just by pulling the NVRAM card from
the 5Gig SRP a placing it in the 10 Gig SRP and booting?
An
Hi All,
I hope some knowledgeable individual can give me some guidance on an ERX
1410 question
I have a DPFE Line card & I/O which boots correctly under version 2.61(yea
I'm not kidding it's really that old) however when I attempt to move the
line card & I/O to a chassis with OS ver 5.1.3 it
Hi All,
I'm attempting to bring up an oOCx-STMx F0 line card (350-00098-00) on a
legacy ERX 1400.
I am using a PIC OC3-4SM_I/O card (350-10065-02) OC3 with 4 SM ports.
Can someone tell me if this is a valid hardware configuration?
I receive a message at boot "ERROR Line Card in slot 8 autoboot
Hi All,
We are in the process of setting up an ERX as a PPPoE server using a Gigabit
Ethernet port.
I followed a section titled "Configuring Dynamic PPPoE over Static PPPoE
with Ethernet Interface Columns" in the config guide:
Link Layer Configuration Guide Ver 6.1
Using a WINDOWS PPPoE Clie
Hi All,
We are in the process of setting up an ERX as a PPPoE server using a Gigabit
Ethernet port.
I followed a section titled "Configuring Dynamic PPPoE over Static PPPoE
with Ethernet Interface Columns" in the config guide:
http://www.juniper.net/techpubs/software/erx/junose61/swconfig-link
ny advice on how to bring this line card online would be much appreciated.
Thanks & Regards
Dr. Rocco DiSanto
[EMAIL PROTECTED]
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
Hi all,
Would anyone be able to advise me on how I might go about clearing a corrupt
image load on an ERX line card? I have a DPFE (duel port fast eth) card in
failed mode.
Watching it boot through its diag port it appears that the hardware passes
all tests. It begins to load the image for fast
Hi all,
I've been reviewing the release notes to determine if the ERX's SRPs require
SODIMMs in pairs. Example: Can the SRP work with 1 512 Module installed or
would it require 2 256 Meg modules to function.
Any definitive information or reference to this information would be much
appreciated.
A
8 matches
Mail list logo