Hi,
We are implementing a monitor solution based on Nagios.
I have managed to find the OIDs for:
- Free Memory
- Temperature
- Fan status
- Sessions
- Uptime
- SW version
But I can't find which OIDs to query to get info about:
- Number of active VPN tunnels
- Number of policies
- HW model o
Hi,
We will migrate our existing NS204 to an SSG520.
In the NS204 we have a lot of route-based VPN tunnels bound to the Untrust Zone.
I have heard that you shouldn't do it like this and instead have a dedicated
VPN Zone where the tunnels are terminated.
Am I Correct?
Is this what the predefi
Hi!
Here is a tricky one... or?
I have an M20 with one e1 PIC with four E1-interfaces.
On interface 0 in the E1-PIC I recieve 32 timeslots.
Is it somehow possible to "split" those incoming 32 timeslots and deliever
the first 10 timeslots to port 1 and the remaining 22 timeslots to port 2 in
my
Hi!
I have an ATM-link between a M20 (JunOS 8.1R1.5) and an ERX1440 (JunOSe
7.2.0)
When I run a "monitor interface traffic" command in my M20 it looks like I
am running 125Mbit/s on the link. But when looking in the ERX it only
reports about 34Mbit/s. See printouts below. (I have been looking f
Hi,
I'm trying to move a Gigabit PIC from an M7i (JunOS7.3) to an old M20
(JunOS8.1). When situated in the M7i the PIC is working fine but when I
insert it in the M20 it is never found.
I have other (older) Gigabit PICs in my M20 as well as ATM, FE and Tunnel
PICs and they are all working fine.
5 matches
Mail list logo