[j-nsp] VPLS clients Inaccessible

Hi Experts I have One MX480 and Two MX240 routers connected with each others. Running VPLS and L3 services b/w them. In MX480 2 (1Gbps) port connect with server machine configure as vpls access port. In Mx240 1 (1Gbps) port connect with Cisco switch configure as vpls Trunk port. The issue is i

[j-nsp] LFM failure detection

Hi experts How i verify LFM failure detection time in JUNOS? I enable traceoption but not find any failure time. config and output given below. [edit protocols oam ethernet link-fault-management] j...@m320.2# show traceoptions { file LFM; flag all } interface ge-0/2/0 { pdu-interval

Re: [j-nsp] BFD over MPLS RSVP

you have 127.0.0.1 configured on the loopback ? > > You actually need it as the router uses this as the source address for > the MPLS OAM sessions - because of the standard . > It's strange I know ... > > cheers > Sean > > > On 2/10/10 4:01 PM, Fahad Aqeel wro

[j-nsp] BFD over MPLS RSVP

Hi Experts I have 2 M320 ( P )routers Junos 9.3S2.1 connected with Gig ports and other vendor routers. I m trying to enable BDF over rsvp. BDF session is not create even with Juniper router like i run # sh bfd session. my config. mpls { path-mtu { rsvp mtu-signaling; }