[j-nsp] EVPN on QFX5200

Does anyone have a working example for EVPN configuration on the QFX 5200's that they'd be willing to share? I've got four 5200's split between two DC's with 2x100G links between each pair in a mesh. I'd like to run EVPN on them such that my network infrastructure between the sites is transparent

[j-nsp] Cabinets for MX10008

What cabinets are folks using for the MX10008? ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp

Re: [j-nsp] Using a QFX5100 without QFabric?

How do you handle 10G port licensing on the 5048? That gets expensive quickly. I've got about 75 qfx's deployed as PE devices right now because of the 5048 port licenses. The major limitation of the qfx as a PE device is that it doesn't support VPLS. It does however do EVPN over vxlan, which can b

Re: [j-nsp] Service Activation Testing

Primarily, I need to valid throughput and frame loss at the moment. having the ability to do L2/L3 with CoS/QoS is icing on the cake. On Sun, Sep 25, 2016 at 6:29 PM, James Harrison wrote: > On 22/09/2016 14:41, Joe Freeman wrote: > > I've been asked to put together a solution tha

[j-nsp] Service Activation Testing

Hello folks- I'd like to know what everyone is doing for Ethernet Service Activation testing out there. I've been asked to put together a solution that allows us to do SAT on every new turnup. These are all Ethernet services. I've been trying to figure out how to do it in the MX platform since t

[j-nsp] EVPN/VXLAN on QFX5100

Does anyone have working sample config they can share? Our SE recommended trying to use EVPN on our 5100's in place of VPLS since it's not supported on the 5100's. I'm having trouble getting it to work between two QFX's in my lab. The QFX's are connected via an MPLS/IP connection with LDP/RSVP/IS

[j-nsp] Flexible Ethernet Services on QFX5100

Is anyone using this feature on the QFX5100? Anyone been able to get an answer from Juniper as to the chances it will be pulled in the next major release? Thanks- Joe ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailma

Re: [j-nsp] Juniper 10G Switch Options

Keep in mind the QFX5100 doesn't support evpn or vpls. To do vpls right now, we're having to l2vpn back to an MX tunnel interface and stitch into a bridge domain. It's not pretty but so far it has worked. We've got our fingers crossed that evpn is coming soon. Also, the 5100's apparently aren't us

[j-nsp] QFX5100 question

Before we go out and spend a large amount of money to replace some gear we're not happy with in our network, I thought I'd check to see what opinions I could get on the QFX5100. We are looking at using them in an MPLS PE role, with the new code release that has added support for L2VPN's (according

Re: [j-nsp] M20 fpc issue

on 30-Sep-2011 so 12.x versions Junos might not support the FPC. > > Also, you should see something in var/log/messages if the system can't > bring the fpc on line. > > request chassis fpc online slot should also give you an error > message if it can't bring it online. >

[j-nsp] M20 fpc issue

Greetings- I have an M20 in the lab that I need to get up for a couple of tests. I realize it's an old boat anchor and isn't supported, but it's what I've got at the moment. All I really need to do is some MPLS/LDP testing, which it should be able to do. I have Junos 12.3R1.7 running on this hard

Re: [j-nsp] OSPF default problem

Cord MacLeod wrote: > You are correct, but I haven't even setup the machine network as of yet. I > simply am attempting to get 10.0.0.* to be able to hit the Internet using > gatway 10.0.0.1. > > > > > On Jan 20, 2009, at 12:29 PM, Joe Freeman wrote: > > Withou

Re: [j-nsp] OSPF default problem

Without a gateway that exists in both the 10.0.1.0/24 and the 10.0.0.0/23networks, nothing on the 10.0.1.0/24 will be able to hit an address on the 10.0.0.0/24 space. You do realize that 10.0.0.0/23 overlaps with 10.0.1.0/24 so that the gateway will see 10.0.1.0/24 as part of the larger 0.0/23 sup

Re: [j-nsp] What do for a terminal server?

That's what the 'tail' command is for ;) On 6/25/07, Leigh Porter <[EMAIL PROTECTED]> wrote: > > > Thats nice. Now what I would like next is for it to run `screen` on each > RS232 port. The I can log in and see what happened and scroll back a few > k lines. &g

Re: [j-nsp] What do for a terminal server?

Actually, Cyclades (now Avocent) makes a dedicated console server as well... Check out the ACS series... http://www.avocent.com/web/en.nsf/Content/CycladesACS_Landing They come in variants from 1 to 48 ports, offer out-of-band management via on board ethernet, or pcmcia slot (think modem, gsm/edge