-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Im unable to verify the duplex settings of a FastE link through the
show command. There is no link partner information under negotiation
status, but I'm able to ping the other side interface. Any idea why
this information is not visible?
/[EMAI
It is messing up the logs. Any ways to rectify this defect?
/Kana
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: juniper-nsp@puck.nether.net
Sent: Tuesday, August 21, 2007 3:39 AM
Subject: Re: [j-nsp] CFEB error
>I've been getting a lot of CF
Hi,
I've been getting a lot of CFEB related errors on my M7i logs, as below:
*
[date & time] [hostname] cfeb hge_sffp_i2c_set_read_addr timeout waiting SFFP
read addr config
[date & time] [hostname] cfeb HGE(0/0) link 0: error
y comments?
/Kana
- Original Message -
From: David Ball
To: Kanagaraj Krishna
Cc: juniper-nsp@puck.nether.net
Sent: Thursday, June 28, 2007 3:42 AM
Subject: Re: [j-nsp] juniper-nsp Digest, Vol 55, Issue 33
It very likely IS allowing OUTgoing telnet, even without the
Hi,
I've applied an input filter (hardening) to protect the routing engine of
an m7i by applying it on the loopback IP. Refer to the config below. The issue
is that, we can't telnet port:80 to any external IP from the box itself.
Obviously I've not allowed access to port 80 on my box in the i
Hi,
I have few questions related to M7i's. We have a few running in our
network.
- With a RE (512Mb) and CFEB (128Mb), how many eBGP upstream sessions (each
receiving full routes from provider) can a box take?
- From performance view, how much does a M10i differ from m7i?
- One my boxes h
Jeff,
Would it still be applicable if either of the AS hops prepend?
/Kana
> Hi,
>
> It would look like:
> ABCD+ .{0,2}
>
> Regards,
> Jeff
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:juniper-nsp-
> > [EMAIL PROTECTE
Hi,
I have this AS path access list to one of my BGP peerings (inbound route
map) which is based on Cisco to set different local pref to:
- direct peering AS
- direct peering AS + 1st AS hop
- direct peering AS + 1st AS hop + 2nd AS hop
Based on Cisco
---
ip as-path ac
2.2.2.2;
>
> [EMAIL PROTECTED]> show configuration routing-options forwarding-table
> export load-balance;
>
> /ihsan
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Kanagaraj Krishna
> Sent: Friday, March 16, 2007 9:1
Hi,
Which is the best way to get BGP load balancing up and running with the same
provider on a m7i using loopback IP? I've realised quite a number enquiries on
this matter on most forum. Can it be done? In cisco usually the things needed
are:
- 2 static routes pointing to the providers loopb
10 matches
Mail list logo