[j-nsp] Unfamiliar with Juniper M10 Config Files

I am replacing an old Cisco router with a Brocade MLX as IBGP peer to a Juniper M10. I am only getting 250K routes and I have NO filtering enabled. I know that the Juniper is receiving a full EBGP route table but is only passing 250K to any of its internal IBGP peers including the old Cisco.

[j-nsp] Seeking Input on Rough Scaling for T and M series MPLS PE Terminations

All Just wanted to get a feel for the "reasonable" scaling numbers when using an enhanced M or T series Juniper as a PE router. In most cases the PE router has T1 aggregation interfaces on the line side and POS interfaces on the trunk side. Seeking numbers for both MPLS and VPLS services.

[j-nsp] Load Balancing via BGP outbound at Colo

All We would appreciate some ideas for the best method of implementing limited traffic engineering via BGP for our current network. We have two EBGP routers in the same physical location with and IBGP connection between them, each are dual homed to 3 Tier 1 ISP's and single homed to one other I

[j-nsp] Rudimentary BGP Load Balancing

All We would appreciate some ideas for the best method of implementing limited traffic engineering via BGP for our current network. We have two EBGP routers in the same physical location with and IBGP connection between them, each are dual homed to 3 Tier 1 ISP's and single homed to one other I