I already try this, but system goes to u-boot “=>” before it reach this level
"loading /boot/defaults/loader.conf”
Lukasz
> On 30 Jul 2016, at 15:54, Stacy W. Smith wrote:
>
>
>> On Jul 30, 2016, at 5:07 AM, Lukasz Martyniak
>> wrote:
>>
>>
HI all
I’m looking for solution to tftpboot or usbboot from u-boot.
My ex4300 stuck in u-boot and it can not find kernel. I can connect to tftp but
i do not have uImiage / kernel files.
How can i load “loader>” to reinstall junos ? Do any of you have experience
with this?
Best
Luk
Hi,
I have just open my new MX104 and trying to perform some tests, but i have this
issue which i can not solve. The ISSU is not working after :
run request system software in-service-upgrade
/var/tmp/jinstall-ppc-13.3R1.6-domestic-signed.tgz reboot
error: Unrecognized command (chassis-contro
mitting, only to
> trigger the same sort of changes at the other end is one issue that we hoped
> to avoid.
>
> HTHs
>
>
>
> -Original Message-
> From: juniper-nsp-boun...@puck.nether.net
> [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Lukas
Hi all
Is it possible to configure router with ::/0 same way as hosts are configured
with IPv6 stateless autoconfiguration ?
This is what i would like to achieve:
R1 --- R2
I have eBGP between R1 and R2. I can advertise only one ipv6 prefix (but not
::/0) to R2 and i can not configure R2.
> For GRE reassembly, you need IDP policy, this means high memory SRX model.
> IDP license is not needed.
> Rgds
> Alex
>
> - Original Message ----- From: "Lukasz Martyniak"
>
> To:
> Sent: Tuesday, January 24, 2012 2:04 PM
> Subject: [j-nsp] GRE packet f
Hi all
I have some problem with gre tunnels. I need to fragment packages in tunnel. I
run gre between two jseries (junos 10.4R6) and lunch MPLS on it. The problem
looks like that packages with MTU above 1476 are not fragmented/reassembled and
are dropped.
interfaces gr-0/0/0
unit 10 {
c
7 matches
Mail list logo