Hi all
I'm trying to copy pppoe (access internal) routes to rib-group x, noting
that I've already copied the interfaces and dynamic routes, but the access
internal routes are not copied. I think there should be something to be
congiured under dynamic profiles or something like that that allows me
at 14:00, BESSALA TSALA Mathurin <bess...@gmail.com> wrote:
> Hi,
> Does each lo0 @ IP is visible via ISIS ?
> On 8 Aug 2016 12:59, "Mohammad Salbad" <masal...@gmail.com> wrote:
>
>> Hi experts
>>
>> I have mx and acx routers both running isi
in
operation, I'm trying to find out what might cause this behavior..
On 8 August 2016 at 15:56, Alexander Arseniev <arsen...@btinternet.com>
wrote:
> Hello,
>
> Do You have "set routing-options router-id " line in
> Your config?
> Thanks
> Alex
>
> On 08/08/2
Hi experts
I have mx and acx routers both running isis and rsvp and I have mpls lsp
configured between their loopbacks.
when trying to establish ldp and l2circuits it does not work and when I do
show ldp neighbor details from both sided it gives me trasport address
0.0.0.0
noting that I have
Try to set statistics under the sub interfaces
Regards
M. Salbad
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
) to ignore the DN bit set
by the service provider PE.
Thank you again
M. Salbad
From: Ivan Ivanov [mailto:ivanov.i...@gmail.com]
Sent: Tuesday, April 29, 2014 11:01 AM
To: Amos Rosenboim
Cc: Mohammad Salbad; juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] OSPF external routes in database
there is a workaround for this…
However, thank you all for your help
BR
M. Salbad
From: Krasimir Avramski [mailto:kr...@smartcom.bg]
Sent: Tuesday, April 29, 2014 1:32 PM
To: Mohammad Salbad
Cc: Juniper-Nsp
Subject: Re: [j-nsp] OSPF external routes in database but not in routing table
Dear Mohammad
Please refer to the below link
http://www.juniper.net/techpubs/en_US/junos12.3/topics/reference/configurati
on-statement/optimize-timer-edit-protocols-mpls.html
Also please consider the following:
The optimize timer is a timer that starts @ a certain time and runs
Dear All
We are trying to configure port mirroring on MX960 router running version
10.2R3.10 as below:
PC1 (10.10.10.2) connected to port ge-11/0/3 bridge domain 3000 irb.3000
10.10.10.1
PC2 (30.30.30.2) connected to port ge-11/1/2 bridge domain 3001 irb.3001
30.30.30.1
Capture PC (20.20.20.2)
Hi All
We have PB-1CHOC48-STM16-IQE card is a channelized STM16.
It supports operation as :
- 4 STM4
- Or 16 STM1
Can we have a mix: 2 STM4 and 8 STM1 ?
Thank you in advance
MSalbad
___
juniper-nsp mailing list
Hi All
We have an M10i router running 10.2R3.10 (512M RAM) ((uptime two years))
with high memory utilization as follow:
show chassis routing-engine à Memory utilization 95 percent
show system processes extensive à 1317 root1 960 372M 363M
select 39:09 0.00% dfcd
then I
can't configure the port that is facing the wireless device to port mode
access because all other customers will be down.
Thank you
Mohammad Salbad
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman
à Access Server LAN à RouterA à
RouterB à RouterC
Which is OK with me and it is as it should be
So finally my problem is with the traffic from the host to the internet, I
need to force it to go through the access server LAN.
Thank you
Mohammad Salbad
into smaller
pieces before sending them to the wireless device and combining the packet
on the other end (something like link fragmentation and interleaving).
Thank you
Mohammad Salbad
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https
14 matches
Mail list logo