Thanks for the insights. Which 3rd party transceivers have you had the best
luck with then?
Robert
On Thu, Feb 23, 2012 at 4:31 AM, Daniel Roesen d...@cluenet.de wrote:
On Wed, Feb 22, 2012 at 02:27:40PM -0600, Robert Juric wrote:
Juniper also has only tested and verified their equipment
wrote:
On Tue, 21 Feb 2012, Robert Juric wrote:
They may have changed their policy, but I believe Juniper only supports
Juniper optics in their equipment. Others will work, but if you want full
support from Juniper I suggest you talk to your account team.
They also don't support cables
They may have changed their policy, but I believe Juniper only supports
Juniper optics in their equipment. Others will work, but if you want full
support from Juniper I suggest you talk to your account team.
Robert
On Tue, Feb 21, 2012 at 7:23 AM, Mike Williams mike.willi...@comodo.comwrote:
How about some output from show interface ae4 detail as well as the
member interfaces when the ae goes down? By your configuration the ae
interface should remain up as long as a single interface is still up.
Robert
On Wed, Nov 23, 2011 at 3:00 AM, hani ibrahim
hani.ibrahim.a...@gmail.comwrote:
No XFP and SFP transceivers are quite different. With the XFP uplink module,
you're stuck with XFP transceivers.
Robert
On Wed, Oct 19, 2011 at 3:20 AM, hani ibrahim
hani.ibrahim.a...@gmail.comwrote:
Hi All,
kindly i need your help in one case , i have EX4200 Switch and one of the
up-links
really be better. My understanding is that the
sooner you filter the traffic in the processing flow, the more effecient it
is.
Robert Juric
On Thu, Oct 13, 2011 at 8:40 AM, Daniel M Daloia Jr daniel.dal...@yahoo.com
wrote:
Hi Folks,
Is there any reason why I shouldn't allow ssh access to a remote
-Exploring-IPv6/ba-p/52402
DayOne Advanced IPv6:
http://forums.juniper.net/t5/Day-One-Books/Day-One-Book-Advanced-IPv6-Configuration/ba-p/86538
TechPubs:
http://www.juniper.net/techpubs/en_US/release-independent/junos/information-products/pathway-pages/junos/product/index.html
HTH,
Robert Juric
According to the Juniper site:
When the release reaches EOL the software images are removed from
www.juniper.net and JTAC will only provide support on a commercially
reasonable effort basis.
The install-media has to be installed to the boot device, so unless you
have the specific install-media
8 matches
Mail list logo