Re: [j-nsp] EX4200 1000baseT SFP unsupported in 9.4

Hello, I saw the same after upgrading from 9.2R2.15 to 9.3R2.8 and have not tried later releases yet Switch stopped detecting two SFP-SX installed in 4x GE SFP module I do not know what brand they were PIC 1 REV 03A 711-021270 AR0208112594 4x GE SFP Xcvr 0

Re: [j-nsp] XFP and XENPAK

Hello, Thanks, will be able to try in a day or two Best regards, Ruslan Richard A Steenbergen wrote: On Fri, Feb 06, 2009 at 10:37:30PM +0300, Ruslan A. Magomedov wrote: Hello, Did somebody try to have LW XENPAK working in 10Gig Ethernet PIC. I am asking this question generally because LW

Re: [j-nsp] XFP and XENPAK

Hello, Did somebody try to have LW XENPAK working in 10Gig Ethernet PIC. I am asking this question generally because LW is not mentioned in the PIC specification http://www.juniper.net/techpubs/hardware/m-series/m320/m320-pic/10-gigabit-ethernet-pic-with-xenpak-m320-router.html#ten-ge-xenpak Th

Re: [j-nsp] System board memory expansion on M7i

Hi, > That's correct. However: isn't the MEM-FEB-256-S just a normal SDRAM > module as well? Didn't know that was available as an upgrade. As far as i know, M20/M40 Internet Processor II SCB - 2xSLOTs DIMM DRAM ECC 168-pin M10 (not M10i) - 1xSLOT SO-DIMM SDRAM ECC 144-pin I do not know what m

[j-nsp] vlan-vpls on ae interface

Hi In JunOS software documentation mentioned that there is no possible to use vlan-vpls encapsulation on logical unit of aggregated ethernet interface. I have configured this and i see no problems still. Could anyone explain this please? MX960 JunOS 8.3R2.8 http://www.juniper.net/techpubs/softwa

[j-nsp] M320 strange behaviour

Hello I experience problems with M320. There are two FPCs(M320 FPC Type 3) with one 10Ge XENPAK in each FPC and these two 10Ge are aggregated. It happens when numerously route updates are taking place. It can be resolved by 'request chassis fpc restart slot...' but it occurs again later JUNOS 8.1

Re: [j-nsp] fragmentation in GRE tunnel

es tunnel pic there is no way to do what you want. You can use > the 'clear don't fragment' option on the m-series although it requires > an AS pic. > > - Dan > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTE

[j-nsp] fragmentation in GRE tunnel

Hello Could anybody help me with resolving this problem. Is it possible to transmit packets, then tunnel MTU is greather than MTU of egress interface, in other words using only GRE fragmentation (not ip fragmentation). I have tried it on Juniper M-series with tunnel PICs and have got no result. It