Sampling applied at the interface ...
i dont use firewall filter.
- Original Message -
From: Stefan Fouant sfou...@gmail.com
To: Servet ser...@doruk.net.tr; juniper-nsp@puck.nether.net
Sent: Thursday, September 03, 2009 3:18 PM
Subject: Re: [j-nsp] Juniper Netflow
Curious
Hi ,I think ; If you redistrubute your networks under BGP config
these routes origin become incomplete , this is normal behavoir of cisco
routers and it is different from Junipers
If you want to avoid this issue , you can set origin manually by route-map.
Regards
servet
- Original Message
Nilesh is right I think , in juniper you specify only payload size ,
in cisco you specify full frame size (ip header+icmp header+Payload)
servet
- Original Message -
From: Ahmed Abdelghany aaeg...@yahoo.com
To: Nilesh Khambal nkham...@juniper.net; Flavio Schappo
fscha...@gmail.com
Hi Guys
i want to enable Qos mechanism on Ethernet interfaces, there is more then 50
sub-interfaces on M7 series router
How i can implement same QoS policy on these interfaces and, which one is
practical for QoS, prioritize or marking (dscp)
İf you have some example configuration texts, can
4 matches
Mail list logo