Power supplies have firmware on them ;)
Regardless - I don't know much about the MX960 arch but do you have enough
power supplies to maintain N+1 at full tilt?
> -Original Message-
> From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf
> Of Aaron Gould
> Sent:
You're looking in the wrong place :)
You might better understand if you look here:
https://en.wikipedia.org/wiki/Ethernet_frame
> -Original Message-
> From: juniper-nsp [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf
> Of Jason Lixfeld
> Sent: Tuesday, 22 January 2019 6:09 AM
>
DRAM: Initializing - DDR: 2048 MB
Testing DRAM from 0x to 0x8000
DRAM test phase 1:
DRAM test fails at: 7ff63e24
hang at function = 0xfffbe504
### ERROR ### Please RESET the board ###
Any suggestions?
Yep - its broke. RMA? DOA?
We have a heterogeneous Juniper-Cisco environment where LDP seems to
work with no known problems. It is significantly different from yours
in that we have:
- IS-IS as our IGP
- Juniper M320/MX and Cisco CRS1/IOS XR (and one 12K/IOS XR) P routers
- Juniper M/MX and Cisco 12K/IOS as PE
4 matches
Mail list logo