Hi
On the J2320, check if your loopback interface is configured under
protocols ldp.
-Werner
On Wed, Aug 6, 2014 at 7:06 AM, thiyagarajan b
wrote:
> Hi,
>
> I have made up a l2xconnect between cisco NPEG2 and juniper J2320 and found
> the vc is not coming up. When I find the state its in OL(
Greetings
I don't find a M-Series (M7i or M10i) Channelized E1/T1 PIC that supports
framed E1 G.703
Our local Telco equipment is using G.703.
We are able to get an E1 circuit up and working with the config below.
ce1-0/1/0 {
clocking external;
e1-options {
framing g704-no-crc4;
Greetings
I have a requirement to preserve our clients DiffServe markings over our
MPLS network.
I'm looking for Juniper documentation to implement either (pipe mode or
short pipe mode) on our J-series and M-series routers.
Any useful configuration documentation will be helpful.
-Thanks
Werner
Check the MTU of the physical interface, some GigE interface modules on the
J-Series routers only support 9014 bytes, Junos allows you to set to 9192,
try to drop the MTU value to 9000 bytes.
On Wednesday, March 20, 2013, Bill Sandiford wrote:
> Here is some outputÅ IP addresses sanitized with x.x
4 matches
Mail list logo