[j-nsp] Question about filter input in lo0

Hello, When in a Juniper i apply an input filter in the lo0 interface this protection apply for the routing-instance too ?? For example .. In the filter ... named protectRE i have one term to protect the bgp session , the term looks like this: term bgp { from { source-prefix-list {

[j-nsp] Hi latency in GE interface

Hello , I have a juniper m10i with a GE interface . Running junos 8.2 . The router is connected to an External Router via one GE interface. But the GE interface is reporting hi latency . In a normal working the delay between the two routers is 5 ms. (the m10i router and other external

[j-nsp] Maxium VRF in a EX4200

Hello .. does anybody know in your expirence or theorical information , how many vrf could be configured in a EX4200. 50 - 80 routes per vrf. Could be a good idea use an EX4200 as and enterprise router with probably 75 or 100 vrf ?? Thanks for your comments luis

Re: [j-nsp] Question about ISO and ISIS family

Thanks... I need to manipulate ISO routes , and export the ISO routes in the iso.0 table to another router via ISIS. I think it can not be posible with juniper boxes ( im not sure if the J series do it ) . thanks .. 2010/7/28 Felix Schueren felix.schue...@hosteurope.de Luis, Hello ..

[j-nsp] Question about ISO and ISIS family

Hello .. I´m working with isis using iso addressing, so now when i see the routes in my EX , it has the next: juni...@junex.cvie.mgmt.01# run show route inet.0: 13 destinations, 13 routes (13 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both ...

[j-nsp] How to configure shaping or rate linit in EX4200

hello .. does anybody know how to configure shaping in one port of a juniper EX4200. I need to configure a shape or rate-limit in one physical port, but it´s not exactly the same as in a juniper router. thanks ... luis ___ juniper-nsp mailing list

[j-nsp] Frame Relay Compression

Hello everybody.. Does anybody know if is posible configure frame relay compression on t3 PICs . ( 4 x T3 PIC ) I have in one side a Cisco Router with Frame Relay but it has configured frame-relay payload compression FRF9 stacoption. in the other side there is a Juniper router with Frame

[j-nsp] vrrp groups

Hello .. Does anybody know how many vrrp groups can i config in a m10i router. Propably i will have 300 vlans in one interface in a router , and i need to configure vrrp group too. One vrrp group for each vlan. But i need to know the performance in this part of my juniper m10i. thanks

[j-nsp] question about JNTCP

Hello ..does anybody know how long time takes to juniper confirm the Lab Request Form for practical exams .. I sent it yesterday via the Juniper web site, but i didn´t receive an e-mail to confirm my request . I sent my request for the new class location at Virginia.

[j-nsp] Load Balancing with LSPs

Hello .. I have a PE router conected to a P router with E1s interfaces. I built 3 LSPs and each LSP with the respective path, each Path is taking one E1. Actually when i see the routing table i see that the routes has 3 posible next hops and they are the 3 LSPs .I have configured in the

Re: [j-nsp] Load Balancing with LSPs

-server are in the mix since the IPs of several devices can be hidden by the NAT/proxy-servers. -Ariff On Nov 17, 2008, at 2:37 PM, luis barrios wrote: Hello .. I have a PE router conected to a P router with E1s interfaces. I built 3 LSPs and each LSP with the respective path, each Path

[j-nsp] About Routers J6350

Hello .. My question is about J6350, Can i we use a J6350 route as a PE router on an MPLS network. I was checking the performance of the J6350 but im not sure. I need vpls, pseudo-wired and ipvpns, actually i need a robust equiment on the core maybe m10 or m120, but in the distribution layer