Hello, I'm testing a MX960 and coming from a Cisco background I'm having a few problems/design questions regarding integration with the Cisco network.
I have the following setup: +---------[MX960]---------+ | | |Trunk MSTP Trunk| | | [Cisco]-------------------[Cisco] Trunk One MX960 is connected to two Cisco switches which have VLAN trunk ports towards the MX. The Ciscos speak MSTP on all trunk ports. What I need from the MX: 1. I need to provide L3 routing for a few of the VLANs I get from the Ciscos. 2. I need to be able to speak OSPF/BGP/MPLS over other VLANs. 3. I need to transport the traffic from some VLANs via VPLS to another router. 4. Additionally the MX must participate in the MSTP domain on both trunks so that L2 failover via spanning-tree works for points 1-3. So which options do I have? I looked at bridge-domains where I would be able to do 1+2+4, but not VPLS (or I didn't get how). I also looked at "interface-mode trunk" as this seems the right way to do the L2 handling but I don't know how that mixes with "encapsulation flexible-ethernet-services" which I would like to use for VPLS. Any ideas/suggestions how to proceed would be appreciated. Kind Regards, Sebastian -- New GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE) Old GPG Key-ID: 0x76B79F20 (0x1B6034F476B79F20) 'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE. -- Terry Pratchett, The Fifth Elephant _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp