Would E320/ERX1440 sent Acct_Off when it manually rebooted ? or Will it really happen when a E320 reboot ? How could it know those sessions before rebooting ?
Joe --- Nitin Vig <[EMAIL PROTECTED]>: > Hi Joe, > > The short answer is we send Acct-On when we > configure the RADIUS accounting server on the ERX > and a Acct-Off when we remove the accounting server > or I believe also when the ERX goes down. > > > > BNG-JTAC-1410-3(config)#no radius accounting server > 10.209.74.40 > > DEBUG 07/23/2007 11:29:21 radiusSendAttributes: > ACCOUNTING-REQUEST attributes (default) > > DEBUG 07/23/2007 11:29:21 radiusSendAttributes: > acct-status-type attr added: 8 > > DEBUG 07/23/2007 11:29:21 radiusSendAttributes: > nas-ip-address attr added: 10.209.74.23 > > DEBUG 07/23/2007 11:29:21 radiusSendAttributes: > nas-identifier attr added: BNG-JTAC-1410-3 > > DEBUG 07/23/2007 11:29:21 radiusSendAttributes: > acct-authentic attr added: 1 > > DEBUG 07/23/2007 11:29:21 radiusSendAttributes: > acct-session-id attr added: load:2147483649 > > DEBUG 07/23/2007 11:29:21 radiusSendAttributes: > acct-terminate-cause attr added: 10 > > DEBUG 07/23/2007 11:29:21 radiusSendAttributes: > event-timestamp attr added: 1185190161 > > DEBUG 07/23/2007 11:29:21 radiusSendAttributes: > acct-delay-time attr added: 0 > > DEBUG 07/23/2007 11:29:21 radiusClient: sendPacket: > RADIUS Acct packet sent (default) > > Please wait... > > BNG-JTAC-1410-3(config)# > > BNG-JTAC-1410-3(config)#radius accounting server > 10.209.74.40 > > > > DEBUG 07/23/2007 11:29:26 radiusSendAttributes: > ACCOUNTING-REQUEST attributes (default) > > DEBUG 07/23/2007 11:29:26 radiusSendAttributes: > acct-status-type attr added: 7 > > DEBUG 07/23/2007 11:29:26 radiusSendAttributes: > nas-ip-address attr added: 10.209.74.23 > > DEBUG 07/23/2007 11:29:26 radiusSendAttributes: > nas-identifier attr added: BNG-JTAC-1410-3 > > DEBUG 07/23/2007 11:29:26 radiusSendAttributes: > acct-authentic attr added: 1 > > DEBUG 07/23/2007 11:29:26 radiusSendAttributes: > acct-session-id attr added: load:2147483649 > > DEBUG 07/23/2007 11:29:26 radiusSendAttributes: > event-timestamp attr added: 1185190166 > > DEBUG 07/23/2007 11:29:26 radiusSendAttributes: > acct-delay-time attr added: 0 > > DEBUG 07/23/2007 11:29:26 radiusClient: sendPacket: > RADIUS Acct packet sent (default) > > BNG-JTAC-1410-3(config-radius)#DEBUG 07/23/2007 > 11:29:28 radiusClient: sendPacket: RADIUS Acct > packet sent (default) > > > > Regards, > > Nitin > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of Joe Shen > Sent: Monday, July 23, 2007 2:04 PM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] How is Accounting-On and > Accounting-Off generated inERX1440 or E320? > > > > Hi, > > > > I'm trying to understand how BAS send radius > > packets. > > > > In Radius RFCs there states attributes > > > > Acct-Status-Type = Accounting-Off > > Acct-Status-Type = Accounting-On > > > > But, it seems rfc does not define how > > such packets are generated. > > > > But, there do exist such packets in our network, > > which installs ERX1440/E320. > > > > Is there anybody could do me a favor to explain it > ? > > > > Joe > > > > > > > ___________________________________________________________ > > > 抢注雅虎免费邮箱3.5G容量,20M附件! > > http://cn.mail.yahoo.com > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > ___________________________________________________________ 抢注雅虎免费邮箱3.5G容量,20M附件! http://cn.mail.yahoo.com _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp