Thanks Guys, atleast that gives a success rate guarantee of around 90%,
better than some of those Vaccine drugs in the market.
Cheerz
On Mon, 2009-07-13 at 15:42 -0500, Tim Eberhard wrote:
You configuration will remain after the upgrade/reboot.
Downgrading is the same process as upgrading
Hello again.
Just to confirm the steps if they are correct:
1. download the firmware I want to upgrade to ie 5.2.0r2.0 (Do i get the
zip file or the bin, or is the bin file contained in the zip file)
2. From the Juniper GUI browse and load the Image to be upgraded.
3. Once loaded reboot the
The bin file is within the ZIP. You will load the bin to the firewall.
I would highly recommend against using anything but juniper.net to download
your netscreen software. Never ever get your images from any where but
directly from Juniper. The firewall images could contain back doors, root
kits
Hi there,
I have two juniper netscreens one is Firmware 5.0.0r8.1 . Now I have
encountered a problem when setting up a VPN on this one due to firmware
version thus I need to upgrade it.
The question is how do I upgrade this firmware, challenge being that it
is running live services and if the
Are you using both of the firewalls as n active/active or active/passive;
if yes thn you can try upgrading one of them while the other will take
care of your production services.
Regards,
Masood
Hi there,
I have two juniper netscreens one is Firmware 5.0.0r8.1 . Now I have
encountered a
Sorry guys,
The two firewalls are in completely two different networks and in no way
work together. The reason I mentioned the two is because I tried the
same VPN on the other Firewall with a higher firmware and it worked
within minutes of set-up. So i really want to upgrade this firewall.
Sorry guys,
The two firewalls are in completely two different networks and in no way
work together. The reason I mentioned the two is because I tried the
same VPN on the other Firewall with a higher firmware and it worked
within minutes of set-up. So i really want to upgrade this firewall.
George,
It's not possible to preform any kind of hitless upgrade..
The Netscreen must reboot once the new code is loaded. So you must factor in
the time it will take for the firewall to reload in addition to the hit it
will take when the wall comes back online and the traffic starts to flood
Thanks Guys,
Sure I had planned to upgrade to above 5.2 , are these firmwares
available for download?
So the next question is really about the configs, Once a reboot is done
all the previous setting take in effect, is that so? And for a rollback
the do I just scroll for the image?
Regards
You configuration will remain after the upgrade/reboot.
Downgrading is the same process as upgrading as long as you're going from
say 5.2 to 5.0. Just load the 5.0 image and reboot. The 5.0 image is blown
away when you load the newer screenOS.
Good luck,
-Tim Eberhard
On Mon, Jul 13, 2009 at
10 matches
Mail list logo