Hi
I would like to setup static IGMP joins between Cisco and Juniper.
But it's not working. Juniper is not sending IGMP Joins.
Same configuration Cisco + Cisco working without issues. Any clues ?
Interface configuration for Juniper at Cisco side:
interface GigabitEthernet1/1/1
description
Hi Robert,
What you have below only adds the interface to the OIL for that group. No IGMP
joins are generated!
Regards,
Vladislav A. VASILEV
On 10 Sep 2013, at 07:51, Robert Hass wrote:
Hi
I would like to setup static IGMP joins between Cisco and Juniper.
But it's not working. Juniper is
Hello,
Actually this config generates PIM (*,G) joins upstream to RP.
I'm not aware of static igmp joins(generated) or igmp proxies support in
junos (excluding junosE) - though there is a feature that translates PIM
to
Robert,
Just noticed you actually have ip pim passive under the interface...
The ip igmp join-group in Cisco IOS generates IGMP joins (and PIM joins
upstream), and packets sent to the group address get sent up to the CPU (the
router would reply back to icmp-echo packets sent to the group
You should enable the sap protocol for the group you want to generate join
messages.
On Tue, Sep 10, 2013 at 2:18 PM, Vladislav Vasilev
vladislavavasi...@gmail.com wrote:
Robert,
Just noticed you actually have ip pim passive under the interface...
The ip igmp join-group in Cisco IOS
5 matches
Mail list logo