}
>
>
> On Fri, Sep 23, 2011 at 5:28 AM, Eric Van Tol wrote:
>>> -Original Message-
>>> From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-
>>> boun...@puck.nether.net] On Behalf Of vaibhava varma
>>> Sent: Friday, September 23, 2011 7
age-
>> From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-
>> boun...@puck.nether.net] On Behalf Of vaibhava varma
>> Sent: Friday, September 23, 2011 7:30 AM
>> To: juniper-nsp@puck.nether.net
>> Subject: [j-nsp] Juniper-MX-960-Using the same Ge-Port as
> -Original Message-
> From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-
> boun...@puck.nether.net] On Behalf Of vaibhava varma
> Sent: Friday, September 23, 2011 7:30 AM
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] Juniper-MX-960-Using the same Ge
Dear All
Is there is a possibility in Juniper MX-960 to configure the same
Physical Port to support L2 Bridging ie Trunk Link and also configure
same time for L3 Routing ie Sub-interfaces.
It would look something like this as listed below
{master}[edit]
root@Junos# set interfaces ae1 unit 0 fami
4 matches
Mail list logo